User:Lukas/Werkzeug: Difference between revisions

From CoMakingSpace Wiki
(Bohrergrößen)
 
(39 intermediate revisions by the same user not shown)
Line 1: Line 1:
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!''  
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - [[Tools to Lend|Ausleihen]] tendenziell möglich, einfach fragen!''  
 
== 3D-Drucker ==
Prusa i3 Acrylic (ähnlich "Anet A8"), soll [https://reprap.org/wiki/Diamond_Hotend Diamond Hotend] bekommen und lief deshalb noch nie...
* 2016: "Rumba"-Boards von reprap.me funktionierten 3x(!) nicht und der Kundenservice wurde bei jeder Reklamation schlechter
* neuer Versuch 2020: [https://smile.amazon.de/dp/B07CT9VMSV/ BIQU Tango] via Amazon
** [https://www.thingiverse.com/thing:3370956 Tutorial für ähnliches Setup auf Thingiverse]
 
== Akkuschrauber ==
=== Bosch PSR 960 ===
{{MachineInfoBox
|machine name=Bosch PSR 960
|image=PSR960.jpg
|location={{£bench}}
|access=ask nicely - may be [[borrowed]] [[Category:Borrowable]]
|manual=in the box
|extrabox=yes
}}
[[User:Lukas|Lukas]] has a Bosch PSR 960 you might be able to [[borrowable|borrow]]! Unfortunately, its battery has gotten pretty bad.
 
It has six torque settings and only one speed.
 
::'''Power Supply'''
::There used to be two batteries, but one was quite old and only held its charge for a very short time. It was therefore [[Project:Semi-Cordless Drill|upgraded to a corded pack]].
 
::Charger for the intact one: "AL 1404", 7.2 to 14.4 V, 400 mA => 3 h charging time for the 1.2 Ah pack
 
::'''Please do not leave the battery in the charger for more than 3 or 4 hours, the old NiCd batteries will heat up and suffer from quite the memory effect!'''
 
 
== Arbeitsschutz ==
* Halbmaske: Dräger X-plore 3500
** Filter "Pure P3 R"; Größe L
 
== Bits ==
=== graues Set ===
''nicht mehr ganz vollständig, v. a. security Torx; manche im Forum-Set''
{| class="wikitable sortable mw-collapsible mw-collapsed"
|-
! scope="col"| Size
! scope="col"| Screw Symbol
! scope="col"| Screw Type
! scope="col"| Notes   
|-
! scope="row"| PH0
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 2x short
|-
! scope="row"| PH1
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 3x short, 2x long
|-
! scope="row"| PH2
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 2x short
|-
! scope="row"| PH3
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 7x short, 2x long
|-
! scope="row"| PZ0
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 1x short
|-
! scope="row"| PZ1
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 4x short
|-
! scope="row"| PZ2
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 10x short, 1x long
|-
! scope="row"| PZ3
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 2x short, 1x long
|-
! scope="row"| 4 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 4.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 5.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 6 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 6.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 7 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| T8
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T10
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T15
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T20
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T25
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T27
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T30
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T40
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T45
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T8H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T10H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T15H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T25H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T27H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T30H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T35H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T40H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| 1.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.59 mm (1/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 4 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 2x short(?), 1x long
|-
! scope="row"| 4.8 mm (3/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short, 1x long
|-
! scope="row"| 5.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 5.6 mm (7/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 6 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short, 1x long
|-
! scope="row"| 6.4 mm (1/4")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 4 mm (5/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 2x short
|-
! scope="row"| 5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 6 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 0
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|}


== Bohrer ==
== Bohrer ==
* Forstnerbohrer "Wave Cutter", Fisch, 1-5/8" ([https://www.feinewerkzeuge.de/fisch-forstnerbohrer-inch.html Nr. 316192])
* [[Forstnerbohrer]] "Wave Cutter", Fisch, 1-5/8" ([https://www.feinewerkzeuge.de/fisch-forstnerbohrer-inch.html Nr. 316192])
* Holzspiralbohrer x-x mm (1-mm-Schritte)
** für Teelicht-Hülsen (z.B. [[Project:Tree Trunk Tealights]])
* Holzspiralbohrer mit Senker 3/4/5/6 mm
* [[Holzspiralbohrer]] 3-10 mm (1-mm-Schritte)
* Schlangenbohrer 3/4" (für Holdfasts etc.)
* Holzspiralbohrer mit Senker 3/4/5/6 mm (letzterer noch China-"Qualität")
* [[Schlangenbohrer]] 3/4" (für Holdfasts etc.)


* Metallspiralbohrer x-x mm (0,5-mm-Schritte)
* [[Metallspiralbohrer]] 1-10 mm (0,5-mm-Schritte)
* [[Gewindeschneider]] (einfach, M3-4-5-6-8-10-12) mit Metallspiralbohrern in Zwischengrößen (2.5-3.3-4.2-5-6.8-8.5-10.2)
* [[Glasbohrer]] 4 mm


== Bohrmaschinen ==
* ''[[Schlagbohrmaschine|User:Lukas/Impact Drill]]''
* Bohrhammer: TopCraft TPMB 920 E


== Drechseleisen ==
== Drechseleisen ==
* [https://www.stabilo-fachmarkt.de/guede-drechselbeitel-drechseleisen-satz-5-tlg/a-914817/ Güde Billig-Set]
* [https://www.stabilo-fachmarkt.de/guede-drechselbeitel-drechseleisen-satz-5-tlg/a-914817/ Güde Billig-Set] (öffentlich)
* Schruppröhre 3/4", Narex
* Schalenröhre 1/2" (13 mm), Narex
* Drehröhre "knapp 10 mm" (3/8"?), Crown


== Fräser ==
== Fräser ==
Line 18: Line 450:
! scope="col"| Durchmesser
! scope="col"| Durchmesser
! scope="col"| Schaft
! scope="col"| Schaft
! scope="col"| Länge
! scope="col"| Länge (Schneiden/Gesamt)
! scope="col"| Schneiden
! scope="col"| Schneiden
! scope="col"| Form
! scope="col"| Form
Line 28: Line 460:
|  
|  
| 2
| 2
| "gerade"
| VHM
| klare Kassette
|-
! scope="row"| 3,175 mm
| 3,175 mm
| 22/38 mm
| 1
| "gerade"
| "gerade"
| VHM
| VHM
Line 48: Line 488:
| klare Kassette, 2x
| klare Kassette, 2x
|-
|-
! scope="row"| 6 mm
|-
! scope="row"| 1,6 mm
| 6 mm
| 6 mm
| 18/50 mm
| 5/59 mm
| 3
| 4
| "gerade"
| ''gerade''
| VHM
| ''?? (solide)''
| blau/klare Hülse
| "16 x 4 x 16 x2 16"
|-
! scope="row"| 2 mm
! scope="row"| 2 mm
| 6 mm
| 6 mm
Line 87: Line 527:
| M38
| M38
| blaue Hülse
| blaue Hülse
|-
! scope="row"| 6 mm
| 6 mm
| 18/50 mm
| 3
| "gerade"
| VHM
| blau/klare Hülse
|-
|-
! scope="row"| 8 mm
! scope="row"| 8 mm
Line 103: Line 551:
| Hartmetall aufgelötet
| Hartmetall aufgelötet
| 2x
| 2x
|-
! scope="row"| 0-8 mm
| 8 mm
| 11/66 mm
| 4
| 45° countersink
| ''?? (solide)''
| "iscar EC-E4L [...] 908B8"; 2x sehr ähnlich
|-
! scope="row"| 8 mm
| 8 mm
| 32/63 mm
| 2
| "gerade"
| ''?? (solide)''
| "Ultra-Tools USA 8.0"
|-
! scope="row"| 8 mm
| 8 mm
| 29/66 mm
| 3
| ''gerade''
| M2Al
| "''hy'' 8x8 M2Al"
|-
! scope="row"| 12.7 mm
| 8 mm
| 25.4/71 mm
| 2
| Bündigfräser (Kugellager an Spitze)
| Hartmetall aufgelötet
| Hikoki Nr. 754109 [https://www.hornbach.de/shop/HM-Buendigfraeser-HiKOKI-12-7x71-mm/8822193/artikel.html von Hornbach]
|-
! scope="row"| 12.7 mm
| 8 mm
| 50/87 mm
| 2
| Bündigfräser (Kugellager an Spitze)
| Hartmetall aufgelötet
| weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
|-
|-
! scope="row"| 16 mm
! scope="row"| 16 mm
Line 115: Line 603:
VHM: Vollhartmetall
VHM: Vollhartmetall
M38: wohl etwas besser als HSS
M38: wohl etwas besser als HSS
M2Al: kobaltfreier superharter Schnellarbeitsstahl mit Aluminium
== Hobel ==
* DICTUM langer Schlichthobel Nr. 5 (SK4-Eisen)
** Fasenwinkel 25° (allerdings "bevel down": Schnittwinkel 45° unabhängig vom Anschliff)
* JUUMA Flachwinkel-Einhandhobel (T10-Eisen)
** Fasenwinkel 25°, Schnittwinkel 38°
** [https://www.feinewerkzeuge.de/pdf/juuma-bevelup-anleitung-de.pdf Anleitung (feinewerkzeuge.de)]
* ''diverse Holzhobel''


== Japansägen ==
== Sägen ==
* Dekupiersägebogen ''(coping saw)'': PEBARO, 17 cm (16,3 cm Pin-Abstand)
 
=== Japansägen ===
* Dozuki
* Dozuki
** Hersteller: juuma
** Hersteller: juuma
Line 135: Line 635:
** ''irgendwas mit 0.5 und 0.65 +/- 0.05 mm''
** ''irgendwas mit 0.5 und 0.65 +/- 0.05 mm''


== Stechbeitel ==
* "Haifischsäge" (gröbere Kataba)
* 6, 12, 24 mm "Kork"
** Hersteller: Keil Werkzeugfabrik (Griff selbstgeschnitzt)
** Hersteller: Stubai
*** Modell Nr. 10-2312, Ersatzblatt-Nr. 01-2312
** Blattlänge 300 mm
** 14 TPI
 
=== Kettensäge ===
''[[User:Lukas/Chainsaw]]''
 
=== Stichsäge ===
Bosch "1582.7 electronic", 520 W (aka GST 80 PE Professional)
* Typ 0 601 582 703
* T-Schaft
* '''Blattwechsel:''' Pendelhub III einstellen, Schraube (tief im Knauf) lockern, Blatt hochdrücken und 90° drehen, rausziehen --- neues Blatt 90° gedreht einsetzen, 90° drehen, Schraube ''gerade genug'' festziehen
* '''Handbuch:''' ''ähnlich'' [https://www.manualslib.com/manual/19463/Bosch-1584avs.html Bosch 1584AVS (manualslib.com)] // Suche nach Typennummer auf bosch-professional.de ergibt '''[https://www.bosch-professional.com/binary/manualsmedia/o64947v21_1609929S96.pdf GST 80 PE Professional]'''
* '''Reparaturen:'''
** 2024-10: Klemmschraube saß fest, Gewinde komplett zugesetzt - mehrmals neu eingedreht und "nachgeschnitten", Schraubendreher angeschliffen
 
Sägeblätter:
* Spezialset für Küchenplatten, Craftomat (2x T144DP, 2x T301BCP)
* 1,5x TopCraft Set 10tlg. (Holz bis Edelstahl, zT neu)
 
== Schleifgeräte ==
=== Schwingschleifer ===
{{MachineInfoBox
|machine name=DeWalt DW411
|image=DeWalt DW411.JPG
|used with=[[sandpaper]] - 1/4 sheets<br>(115{{x}}140 mm; 8 holes)
|location=[[Lukas]] - may be [[borrowed]]
|manual=[https://www.manualslib.com/manual/814089/Dewalt-Dw411.html manualslib.com]
|extrabox=yes
}}
DeWalt DW411 palm sander ''(Faustschleifer)'', received without a dust bag. A [[Shop Vac|shop vac]] adapter should be made before using it inside!
 
Besides the [[dust]] issue, be aware that...
* there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
* holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring
 
May be [[borrowed]] for private use over short periods of time - just ask if you're interested!
 
=== Tellerschleifer ===
ehemals Drechselbank ([[User:Lukas/Güde 1000]]), Umbau: [[Project:Disc Sander]]
 
== Schleifsteine ==
* Diamant - mit Wasser benetzen, vertragen nicht viel Druck an Kanten<sup> [https://www.feinewerkzeuge.de/ezelap-diasharpener.html]</sup>
** EZE-LAP 61M (Korn 400, 152{{x}}51 mm)
** EZE-LAP 61F (Korn 600, 152{{x}}51 mm)


== Schraubstöcke ==
== Schraubstöcke ==
* kleiner schwenkbarer auf {{£bench}}
* kleiner schwenkbarer (zuhause)
** völlig verrostet gefunden, Anfang 2018 wieder hergerichtet
** völlig verrostet gefunden, Anfang 2018 wieder hergerichtet
* großer Tischlerschraubstock an [[Roubo Workbench]]
* großer Tischlerschraubstock an [[Roubo Workbench]]
** [https://www.feinewerkzeuge.de/schraub.html York No. 53ED]
** [https://www.feinewerkzeuge.de/schraub.html York No. 53ED]
** siehe [[Woodworking Vise]]
** siehe [[Woodworking Vise]]
== Spaltkeile ==
Vor allem fürs [[Drechseln]] und [[Project:Drying Timber]].
Hilfreich: [http://www.holzwurm-page.de/holz/holz/spaltbarkeit.htm Holzwurm-Page - "Spaltbarkeit von Holz"]
* Dreh-Spaltkeil Bison, Alu, 800 g
* Spaltkeil, geschmiedeter Werkzeugstahl, 2000 g
* 3 kleinere Meißel
== Stechbeitel ==
* 6, 12, 24 mm "Kork"
** Hersteller: Stubai


== Wendeplatten ==
== Wendeplatten ==
Line 151: Line 708:


* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Werkstatt/Kleine-Plaettchen-mit-viel-Potenzial HolzWerken, "Kleine Plättchen mit viel Potenzial"]
* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Werkstatt/Kleine-Plaettchen-mit-viel-Potenzial HolzWerken, "Kleine Plättchen mit viel Potenzial"]
== Winkelschleifer ==
=== King Craft WS 125 ===
{{MachineInfoBox
|machine name=King Craft WS 125
|image=King Craft WS-125.jpg
|location={{£}}
|access=ask nicely - may be [[borrowed]] [[Category:Borrowable]]
|tutors=
|manual=
|used with=125 mm [[Grinding Discs|grinding discs]]
|extrabox=yes
}}
'''CAUTION - the "King Craft" grinder has a switch that will stay on until you push it back to the "off" position, so it could surprisingly start when plugged in!'''
{{£}} [[loan]]ed this machine to the Space for about three years until we were able to buy the better ones. It's not great, but may still come in handy if you need it for a few cuts at home - just ask!
This grinder works with '''125 mm [[Abrasive Discs|discs]]'''.
== Sonstiges ==
* Kombinationswinkel: Starrett 33MH-300
* Streichmaß: Veritas "micro adjust wheel marking gauge"
* Black & Decker "Workmate 2000" - deutlich gebraucht gekauft, ohne Accessoires
** gut bebilderte (FR) Anleitung: https://vdocuments.mx/workmate-2000-manual.html
** entrostet & neu lackiert 2020-3
** geplante Upgrades: Tischplatte (original: 90{{x}}49{{x}}2 cm), Bankhaken
* [[HolzWerken]] (mindestens) ab Ausgabe 80
* [[c't Make]] ca. 2015-2021

Latest revision as of 18:08, 5 November 2024

"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!

3D-Drucker

Prusa i3 Acrylic (ähnlich "Anet A8"), soll Diamond Hotend bekommen und lief deshalb noch nie...

Akkuschrauber

Bosch PSR 960

MachineInfoBox

Bosch PSR 960

PSR960.jpg
Access Requirements:
Manual: in the box
Tutors:


Lukas has a Bosch PSR 960 you might be able to borrow! Unfortunately, its battery has gotten pretty bad.

It has six torque settings and only one speed.

Power Supply
There used to be two batteries, but one was quite old and only held its charge for a very short time. It was therefore upgraded to a corded pack.
Charger for the intact one: "AL 1404", 7.2 to 14.4 V, 400 mA => 3 h charging time for the 1.2 Ah pack
Please do not leave the battery in the charger for more than 3 or 4 hours, the old NiCd batteries will heat up and suffer from quite the memory effect!


Arbeitsschutz

  • Halbmaske: Dräger X-plore 3500
    • Filter "Pure P3 R"; Größe L

Bits

graues Set

nicht mehr ganz vollständig, v. a. security Torx; manche im Forum-Set

Size Screw Symbol Screw Type Notes   
PH0
Screw Head - Phillips.svg
 Phillips 2x short
PH1
Screw Head - Phillips.svg
 Phillips 3x short, 2x long
PH2
Screw Head - Phillips.svg
 Phillips 2x short
PH3
Screw Head - Phillips.svg
 Phillips 7x short, 2x long
PZ0
Screw Head - Pozidrive.svg
 Pozidriv 1x short
PZ1
Screw Head - Pozidrive.svg
 Pozidriv 4x short
PZ2
Screw Head - Pozidrive.svg
 Pozidriv 10x short, 1x long
PZ3
Screw Head - Pozidrive.svg
 Pozidriv 2x short, 1x long
4 mm
Screw Head - Slotted.svg
 slotted 1x long
4.5 mm
Screw Head - Slotted.svg
 slotted 1x short
5 mm
Screw Head - Slotted.svg
 slotted 1x long
5.5 mm
Screw Head - Slotted.svg
 slotted 1x short
6 mm
Screw Head - Slotted.svg
 slotted 1x long
6.5 mm
Screw Head - Slotted.svg
 slotted 1x short
7 mm
Screw Head - Slotted.svg
 slotted 1x long
T8
Screw Head - Torx.svg
 Torx 1x short
T10
Screw Head - Torx.svg
 Torx 2x short, 1x long
T15
Screw Head - Torx.svg
 Torx 2x short
T20
Screw Head - Torx.svg
 Torx 2x short, 1x long
T25
Screw Head - Torx.svg
 Torx 2x short
T27
Screw Head - Torx.svg
 Torx 1x short
T30
Screw Head - Torx.svg
 Torx 2x short, 1x long
T40
Screw Head - Torx.svg
 Torx 2x short
T45
Screw Head - Torx.svg
 Torx 1x short
T8H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T10H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T15H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T25H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T27H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T30H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T35H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
T40H
Screw Head - Torx Tamperproof.svg
 Security Torx 1x short
1.5 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
1.59 mm (1/16")
Screw Head - Hex Socket.svg
 hex socket 1x short
1.98 mm (5/64")
Screw Head - Hex Socket.svg
 hex socket 1x short
2.4 mm (3/32")
Screw Head - Hex Socket.svg
 hex socket 1x short
2.5 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
2.8 mm (7/64")
Screw Head - Hex Socket.svg
 hex socket 1x short
3.2 mm (1/8")
Screw Head - Hex Socket.svg
 hex socket 1x short
3.6 mm (9/64")
Screw Head - Hex Socket.svg
 hex socket 1x short
4 mm
Screw Head - Hex Socket.svg
 hex socket 2x short(?), 1x long
4.8 mm (3/16")
Screw Head - Hex Socket.svg
 hex socket 1x short
5 mm
Screw Head - Hex Socket.svg
 hex socket 1x short, 1x long
5.5 mm
Screw Head - Hex Socket.svg
 hex socket 1x short
5.6 mm (7/32")
Screw Head - Hex Socket.svg
 hex socket 1x short
6 mm
Screw Head - Hex Socket.svg
 hex socket 1x short, 1x long
6.4 mm (1/4")
Screw Head - Hex Socket.svg
 hex socket 1x short
1.98 mm (5/64")
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
2 mm
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
2.4 mm (3/32")
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
2.5 mm
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
2.8 mm (7/64")
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
3 mm
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
3.2 mm (1/8")
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
3.6 mm (9/64")
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
4 mm (5/32")
Pin-in-hex socket screw drive 003.png
 security hex socket 2x short
5 mm
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
6 mm
Pin-in-hex socket screw drive 003.png
 security hex socket 1x short
6
Screw Head - Torq-set.svg
 Torq-set 1x short
8
Screw Head - Torq-set.svg
 Torq-set 1x short
10
Screw Head - Torq-set.svg
 Torq-set 1x short
1
Screw Head - Clutch Type G.svg
 Clutch Type G 1x short
2
Screw Head - Clutch Type G.svg
 Clutch Type G 1x short
3
Screw Head - Clutch Type G.svg
 Clutch Type G 1x short
0
Screw Head - Robertson.svg
 Robertson 1x short
1
Screw Head - Robertson.svg
 Robertson 1x short
2
Screw Head - Robertson.svg
 Robertson 1x short
3
Screw Head - Robertson.svg
 Robertson 1x short
1
Screw Head - Tri-wing.svg
 Tri-wing 1x short
2
Screw Head - Tri-wing.svg
 Tri-wing 1x short
3
Screw Head - Tri-wing.svg
 Tri-wing 1x short
4
Screw Head - Tri-wing.svg
 Tri-wing 1x short
4
Screw Head - Spanner.svg
 spanner 1x short
6
Screw Head - Spanner.svg
 spanner 1x short
8
Screw Head - Spanner.svg
 spanner 1x short
10
Screw Head - Spanner.svg
 spanner 1x short

Bohrer

Bohrmaschinen

Drechseleisen

  • Güde Billig-Set (öffentlich)
  • Schruppröhre 3/4", Narex
  • Schalenröhre 1/2" (13 mm), Narex
  • Drehröhre "knapp 10 mm" (3/8"?), Crown

Fräser

Durchmesser Schaft Länge (Schneiden/Gesamt) Schneiden Form Material Notizen
2 mm 3,175 mm 2 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 22/38 mm 1 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 2 "gerade" VHM klare Kassette
4 mm 4 mm 17/45 mm 2 "gerade" VHM klare Kassette, 2x
1,6 mm 6 mm 5/59 mm 4 gerade ?? (solide) "16 x 4 x 16 x2 16" 2 mm 6 mm 7/51 mm 2 "gerade" M38 blaue Hülse
3 mm 6 mm 8/52 mm 2 "gerade" M38 blaue Hülse
4 mm 6 mm 11/55 mm 2 "gerade" M38 blaue Hülse
6 mm 6 mm 13/57 mm 2 "gerade" M38 blaue Hülse
6 mm 6 mm 18/50 mm 3 "gerade" VHM blau/klare Hülse
8 mm 6 mm 19/63 mm 2 "gerade" M38 blaue Hülse
0-10 mm 6 mm 10/44 mm 2 60° V-groove Hartmetall aufgelötet 2x
0-8 mm 8 mm 11/66 mm 4 45° countersink ?? (solide) "iscar EC-E4L [...] 908B8"; 2x sehr ähnlich
8 mm 8 mm 32/63 mm 2 "gerade" ?? (solide) "Ultra-Tools USA 8.0"
8 mm 8 mm 29/66 mm 3 gerade M2Al "hy 8x8 M2Al"
12.7 mm 8 mm 25.4/71 mm 2 Bündigfräser (Kugellager an Spitze) Hartmetall aufgelötet Hikoki Nr. 754109 von Hornbach
12.7 mm 8 mm 50/87 mm 2 Bündigfräser (Kugellager an Spitze) Hartmetall aufgelötet weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
16 mm 8 mm 11/40 mm 2 "Kugel" Hartmetall aufgelötet Blister; Nr. 360506

VHM: Vollhartmetall M38: wohl etwas besser als HSS M2Al: kobaltfreier superharter Schnellarbeitsstahl mit Aluminium

Hobel

  • DICTUM langer Schlichthobel Nr. 5 (SK4-Eisen)
    • Fasenwinkel 25° (allerdings "bevel down": Schnittwinkel 45° unabhängig vom Anschliff)
  • JUUMA Flachwinkel-Einhandhobel (T10-Eisen)
  • diverse Holzhobel

Sägen

  • Dekupiersägebogen (coping saw): PEBARO, 17 cm (16,3 cm Pin-Abstand)

Japansägen

  • Dozuki
    • Hersteller: juuma
    • Blattlänge/blade length: 240 mm
    • Schnitttiefe/cutting depth: 50 mm
    • Blattstärke/blade thickness: 0.3 mm
    • Schränkung/kerf: 0.45 mm
    • Zahnteilung/pitch: 1.4 mm - 18 TPI
  • Ryoba
    • Hersteller: Bakuma ("SM250W")
    • Blattlänge/blade length: 250 mm (rip: 218 mm)
    • irgendwas mit 0.5 und 0.9 +/- 0.05 mm
  • Kataba
    • Hersteller: Bakuma
    • Blattlänge/blade length: 250 mm
    • irgendwas mit 0.5 und 0.65 +/- 0.05 mm
  • "Haifischsäge" (gröbere Kataba)
    • Hersteller: Keil Werkzeugfabrik (Griff selbstgeschnitzt)
      • Modell Nr. 10-2312, Ersatzblatt-Nr. 01-2312
    • Blattlänge 300 mm
    • 14 TPI

Kettensäge

User:Lukas/Chainsaw

Stichsäge

Bosch "1582.7 electronic", 520 W (aka GST 80 PE Professional)

  • Typ 0 601 582 703
  • T-Schaft
  • Blattwechsel: Pendelhub III einstellen, Schraube (tief im Knauf) lockern, Blatt hochdrücken und 90° drehen, rausziehen --- neues Blatt 90° gedreht einsetzen, 90° drehen, Schraube gerade genug festziehen
  • Handbuch: ähnlich Bosch 1584AVS (manualslib.com) // Suche nach Typennummer auf bosch-professional.de ergibt GST 80 PE Professional
  • Reparaturen:
    • 2024-10: Klemmschraube saß fest, Gewinde komplett zugesetzt - mehrmals neu eingedreht und "nachgeschnitten", Schraubendreher angeschliffen

Sägeblätter:

  • Spezialset für Küchenplatten, Craftomat (2x T144DP, 2x T301BCP)
  • 1,5x TopCraft Set 10tlg. (Holz bis Edelstahl, zT neu)

Schleifgeräte

Schwingschleifer

MachineInfoBox

DeWalt DW411

DeWalt DW411.JPG
Used with: sandpaper - 1/4 sheets
(115 × 140 mm; 8 holes)
Access Requirements:
Manual: manualslib.com
Tutors:


DeWalt DW411 palm sander (Faustschleifer), received without a dust bag. A shop vac adapter should be made before using it inside!

Besides the dust issue, be aware that...

  • there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
  • holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring

May be borrowed for private use over short periods of time - just ask if you're interested!

Tellerschleifer

ehemals Drechselbank (User:Lukas/Güde 1000), Umbau: Project:Disc Sander

Schleifsteine

  • Diamant - mit Wasser benetzen, vertragen nicht viel Druck an Kanten [1]
    • EZE-LAP 61M (Korn 400, 152 × 51 mm)
    • EZE-LAP 61F (Korn 600, 152 × 51 mm)

Schraubstöcke

Spaltkeile

Vor allem fürs Drechseln und Project:Drying Timber.

Hilfreich: Holzwurm-Page - "Spaltbarkeit von Holz"

  • Dreh-Spaltkeil Bison, Alu, 800 g
  • Spaltkeil, geschmiedeter Werkzeugstahl, 2000 g
  • 3 kleinere Meißel

Stechbeitel

  • 6, 12, 24 mm "Kork"
    • Hersteller: Stubai

Wendeplatten

  • 10x quadratisch (Maße?)
  • 10x rund (Maße?)

Winkelschleifer

King Craft WS 125

MachineInfoBox

King Craft WS 125

King Craft WS-125.jpg
Used with: 125 mm grinding discs
Access Requirements:
Tutors:


CAUTION - the "King Craft" grinder has a switch that will stay on until you push it back to the "off" position, so it could surprisingly start when plugged in!

Lukas loaned this machine to the Space for about three years until we were able to buy the better ones. It's not great, but may still come in handy if you need it for a few cuts at home - just ask!

This grinder works with 125 mm discs.


Sonstiges

  • Kombinationswinkel: Starrett 33MH-300
  • Streichmaß: Veritas "micro adjust wheel marking gauge"
  • Black & Decker "Workmate 2000" - deutlich gebraucht gekauft, ohne Accessoires
  • HolzWerken (mindestens) ab Ausgabe 80
  • c't Make ca. 2015-2021
Retrieved from "https://wiki.comakingspace.de/index.php?title=User:Lukas/Werkzeug&oldid=18229"