Herkules Pro-Line Flüsterkompressor Siltek 24: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) |
NitramLegov (talk | contribs) m (→Herkules Pro-Line Flüsterkompressor Siltek 24: Location) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 8: | Line 8: | ||
|material=[[air]] | |material=[[air]] | ||
|used with=[[#Accessories|list of accessories below]];<br>[[Blast Cabinet|blast cabinet]] | |used with=[[#Accessories|list of accessories below]];<br>[[Blast Cabinet|blast cabinet]] | ||
|location=[[Location:: | |location=[[Location::Cold Metal Area]] | ||
|manual=[https://media.cdn.bauhaus/m/709373/BH_DOC_709373.pdf bauhaus.info] | |manual=[https://media.cdn.bauhaus/m/709373/BH_DOC_709373.pdf bauhaus.info] | ||
|assetid=91|donation= | |assetid=91 | ||
|donation= | |||
|similar= | |similar= | ||
}} | }} | ||
| Line 18: | Line 19: | ||
* Max pressure: 8 bar | * Max pressure: 8 bar | ||
* Motor Power: 1kW | * Motor Power: 1kW | ||
===Pressure Control=== | |||
This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. | |||
Turning the knob clockwise will increase pressure, counterclockwise turning increases it! | |||
For an accurate adjustment, first close the reducer all the way and then open it to the desired extent. | |||
<br clear="all"/> | <br clear="all"/> | ||
Latest revision as of 22:28, 12 June 2024
Herkules Pro-Line Flüsterkompressor Siltek 24
| MachineInfoBox Herkules Pro-Line Flüsterkompressor Siltek 24 | |
|---|---|
| |
| Synonyms: | DE: Kompressor |
| Type: | Compressor |
| Material: | air |
| Used with: | list of accessories below; blast cabinet |
| Location: | Cold Metal Area |
| Access Requirements: | Compressor Introduction |
| Status: | Working |
| Manual: | bauhaus.info |
| Tutors: | Lukas NitramLegov Pakue Luzian |
We got a silent air compressor for use within our workshop with the following specs:
- Noise: 59 db
- Capacity: 24 liters
- Max pressure: 8 bar
- Motor Power: 1kW
Pressure Control
This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!
For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.
