Cordless Drills: Difference between revisions

Latest revision as of 19:42, 19 September 2023

MachineInfoBox Cordless Drills

Synonyms:	cordless driver drills; DE: Akkuschrauber, Akkubohrschrauber
Material:	depending on the bit: screws, plastic, wood, metal
Used with:	drill bits, screwdriver bits
Access Requirements:	Drill Introduction
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob
Similar (More or Less):	drill press, screwdrivers, rotary tool, screw gun

Cordless drills are very versatile tools and should not be missing from any workshop. Besides drilling, as the name implies, they are mostly used for driving screws ("electric screwdriver").

Here's a nice video about the internal mechanics of a typical drill!

Proper Use

Please follow these simple guidelines to avoid damage to your screws, material, or the drill itself:

the torque (DE: Drehmoment) can typically be set with the ring before the chuck
- better start out too low than to round your screw in the first try - wood may also be damaged if screws (especially self-tapping/"Spax") are inserted too deep
- the drilling setting at the end of the scale should only be used for drilling, it creates way too much torque for screws and screwdriver bits!
- excessive torque does NOT make you screw faster, it really just wrecks stuff...
there may also be variable speed settings (slider on top)
- only change when the drill is fully stopped
- use the slower one (1) for screwing to prevent slipping
- the higher speed can be used for drilling

Bits

screwdriver bits and bit holders
drill bits (shaft diameter typically limited to 10 mm)

Makita DDF483 (#1)

MachineInfoBox Makita DDF483 (#1)

Type:	Cordless Drills
Location:	Drilling Table
Access Requirements:	Drill Introduction
Status:	Working
Manual:	makita
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob

A smaller and lighter cordless drill, that is best paired with a 2Ah battery. Was bought via betterplace donations in 2022 and another one through a private donation in 2022.

Makita DDF483 (#2)

MachineInfoBox Makita DDF483 (#2)

Type:	Cordless Drills
Location:	Drilling Table
Access Requirements:	Drill Introduction
Status:	Working
Manual:	makita
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob

Makita DDF484 (#1)

MachineInfoBox Makita DDF484 (#1)

Type:	Cordless Drills
Location:	Drilling Table
Access Requirements:	Drill Introduction
Status:	Working
Manual:	makita.de
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob

We have two Makita DDF484 cordless drills. They have a 2 step metal gearbox for different drilling speeds. A torque limit for screwing can be set with the dial behind the chuck. Please use it to avoid breaking bits and screws due to too much torque! The chuck can hold up to 13mm drill bits.
One drill was donated by Ed and the batteries/charger are sponsored from multiple member donations, our Amazon Smile income as well as for the Tor4 workshops.

Makita DDF484 (#2)

MachineInfoBox Makita DDF484 (#2)

Type:	Cordless Drills
Location:	Drilling Table
Access Requirements:	Drill Introduction
Status:	Working
Manual:	makita.de
Tutors:	Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob

Accessories

These were bought from member donations

2x 18V 3Ah Batteries (BL1830B)
1x charger (DC18RC)
MAKPAC box for charger and batteries (usually underneath the drilling table)

Tor 4 aquisitions

2x 18V 5Ah batteries (BL1850B)
1x charger (DC18RC)
MAKPAK box for charger, batteries and drill.

Betterplace donations

1x 18V 2Ah battery (BL1820B)

@@ Line 1: / Line 1: @@
-{{ToolInfoBox
+{{MachineInfoBox
-|tool name=''Cordless Drills''
+|machine name=Cordless Drills
-|image=<!-- GIF would be nice here -->
+|image=drilling wood.gif
 |synonyms=cordless driver drills;<br>DE: Akkuschrauber,<br>Akkubohrschrauber
-|type=power [[drills]]
 |material=depending on the bit:<br>[[screws]], [[plastic]], [[wood]], [[metal]]
-|access=after a [[Handheld Drill Introduction|personal introduction]]
+|location=[[Location::Drilling Table|drilling table]]
-|tutors=[[User:Lukas|Lukas]], {{P}}
 |similar=[[Drill Press|drill press]], [[screwdrivers]],<br>[[Rotary Tool|rotary tool]], screw gun
 |used with=[[Drill Bits|drill bits]], [[Screwdriver Bits|screwdriver bits]]
-}}
+|type=Drills
+|extrabox=yes
+}}
 Cordless drills are very versatile tools and should not be missing from any workshop. Besides drilling, as the name implies, they are mostly used for driving screws ("electric screwdriver").
@@ Line 21: / Line 21: @@
 ** excessive torque does NOT make you screw faster, it really just wrecks stuff...
 * there may also be variable speed settings (slider on top)
+** only change when the drill is fully stopped
 ** use the '''slower one (1) for screwing''' to prevent slipping
 ** the '''higher speed can be used for drilling'''
@@ Line 28: / Line 29: @@
 * [[Bits#Drill Bits|drill bits]] (shaft diameter typically limited to 10 mm)
-<br clear=all>
+<br clear="all" />
-== DeWalt DC740KA ==
+<!--  NOTE: The following block "imports" content from separate pages - please don't change the code! To edit the actual information, please go back and click "edit" next to the section headline you are interested in :-)  -->
-{{ToolInfoBox
+{{MachineInclusion|order=ascending}}
-|tool name=DeWalt DC740KA
-|image=DeWalt DC740KA.jpg
-|location=[[Drilling Table|drilling table]]
-|manual=[http://d.manualretriever.com/lect.php?ID=2289436 manualretriever.com]
-|tutors=[[User:Lukas|Lukas]], {{P}}
-}}
-We are modernizing an old DeWalt drill with LiPo batteries! It's awesome.
-{{Commissioning
+== Accessories ==
-|IssueNumber=12
+'''These were bought from member donations'''
-|Naming=done
-|NamingComment=
-|Picture=
-|PictureComment=
-|Manual=done
-|ManualComment=[http://d.manualretriever.com/lect.php?ID=2289436 manualretriever.com]
-|Documentation=
-|DocumentationComment=needs info on charger once completed, [[Project:DeWalt Battery Replacement|project page]] would be nice as well so we know how to do a similar repair again!
-|QR=probably done
-|QRComment=there's a general one that might be enough
-|Introduction=done
-|IntroductionComment=[[Handheld Drill Introduction]]
-|Security=partial
-|SecurityComment=tool: checked by [[Lukas]]; charger: pending
-|Test=partial
-|TestComment= checked by [[Lukas]]; charger: pending
-|OwnerValue=done
-|OwnerValueComment=
-|Availability=
-|AvailabilityComment=
-}}
-<br clear=all>
+* 2x 18V 3Ah Batteries (BL1830B)
-== AlphaTools AS 18 A ==
+* 1x charger (DC18RC)
-{{ToolInfoBox
+* MAKPAC box for charger and batteries (usually underneath the [[Drilling Table|drilling table]])
-|tool name=AlphaTools AS 18 A
-|image=AlphaToolsAS18A.jpg
-|location=[[Drilling Table|drilling table]]
-|manual=[https://www.manualslib.com/manual/1199145/Alpha-Tools-As-18-A.html manualslib.com]
-|tutors=[[User:Lukas|Lukas]], {{P}}
-}}
-[[Ciaran]]'s AlphaTools drill comes with two battery packs.
-It has two speeds - only change when the drill has fully stopped! - and ''many'' torque settings.
+'''Tor 4 aquisitions'''
+* 2x 18V 5Ah batteries (BL1850B)
+* 1x charger (DC18RC)
+* MAKPAK box for charger, batteries and drill.
-The charger can be a bit confusing - green light means "not charging" and you'll have to press the yellow button to start charging a battery!
+'''Betterplace donations'''
+* 1x 18V 2Ah battery (BL1820B)
 <br clear=all>
-== Bosch PSR 960 ==
-{{ToolInfoBox
-|tool name=Bosch PSR 960
-|image=PSR960.jpg
-|location=''[[Lukas]]''
-|manual=in the box
-}}
-[[User:Lukas|Lukas]] has a Bosch PSR 960 you might be able to use! Unfortunately, its battery has gotten pretty bad.
-It has six torque settings and only one speed.
-=== Power Supply ===
-There used to be two batteries, but one was quite old and only held its charge for a very short time. It was therefore [[Project:Semi-Cordless Drill|upgraded to a corded pack]].
-Charger for the intact one: "AL 1404", 7.2 to 14.4 V, 400 mA => 3 h charging time for the 1.2 Ah pack
-'''Please do not leave the battery in the charger for more than 3 or 4 hours, the old NiCd batteries will heat up and suffer from quite the memory effect!'''
 [[Category:Drills]]
-[[Category:Power Tools]]