File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 23:26, 29 May 2019 | Wood screw - sunk partial tapping.svg (file) |  |
31 KB | Lukas | Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or... | 1 |
| 21:14, 6 November 2018 | Wood screw - sunk full tapping.svg (file) |  |
31 KB | Lukas | further exxageration of tip | 3 |
| 11:52, 12 September 2020 | Wood ring direction.png (file) |  |
14 KB | Lars | Taken from https://informationsdienst-holz.de/fileadmin/Publikationen/2_Holzbau_Handbuch/R04_T01_F01_Holz_als_konstruktiver_Baustoff.pdf (page 26) | 1 |
| 17:58, 7 June 2019 | Wood photo stand.png (file) |  |
1.05 MB | Lukas | simple but decorative holder for a wooden photo out of leftovers from my "TAC" boardgame | 1 |
| 09:58, 5 September 2017 | Wood carving chisels.JPG (file) |  |
102 KB | Lukas | == Summary == Set of twelve simple wood carving chisels. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:55, 14 October 2022 | Wood Lathe Tool Rest - Bent.jpg (file) |  |
262 KB | NitramLegov | 1 | |
| 22:14, 24 April 2022 | Wood Lathe Example.mp4 (file) | 5.09 MB | Lukas | cropped & muted | 2 | |
| 23:36, 14 October 2022 | Wood Lathe Barrels.jpg (file) |  |
240 KB | NitramLegov | 1 | |
| 22:14, 29 June 2022 | Wood Beam Candlestick - stand test.jpg (file) |  |
193 KB | NitramLegov | 1 | |
| 22:14, 29 June 2022 | Wood Beam Candlestick - stand painted.jpg (file) |  |
288 KB | NitramLegov | 1 | |
| 22:13, 29 June 2022 | Wood Beam Candlestick - stand drilling.jpg (file) |  |
257 KB | NitramLegov | 1 | |
| 22:13, 29 June 2022 | Wood Beam Candlestick - stand drilled.jpg (file) |  |
332 KB | NitramLegov | 1 | |
| 22:07, 29 June 2022 | Wood Beam Candlestick - sanding.jpg (file) |  |
1.69 MB | NitramLegov | 1 | |
| 22:11, 29 June 2022 | Wood Beam Candlestick - glacing.jpg (file) |  |
1.68 MB | NitramLegov | 1 | |
| 15:18, 3 July 2022 | Wood Beam Candlestick - glaced.jpg (file) |  |
2.13 MB | NitramLegov | 2 | |
| 22:12, 29 June 2022 | Wood Beam Candlestick - Stand Initial.jpg (file) |  |
304 KB | NitramLegov | 1 | |
| 15:16, 3 July 2022 | Wood Beam Candlestick - Routing jig.jpg (file) |  |
2.8 MB | NitramLegov | 2 | |
| 22:10, 29 June 2022 | Wood Beam Candlestick - Routing glass in jig.jpg (file) |  |
81 KB | NitramLegov | 1 | |
| 15:17, 3 July 2022 | Wood Beam Candlestick - Routing done.jpg (file) |  |
1.16 MB | NitramLegov | 2 | |
| 15:17, 3 July 2022 | Wood Beam Candlestick - Routing 1.jpg (file) |  |
2.04 MB | NitramLegov | 2 | |
| 22:06, 29 June 2022 | Wood Beam Candlestick - Done.jpg (file) |  |
297 KB | NitramLegov | 1 | |
| 16:45, 18 March 2022 | WoodScrewStorage.JPG (file) |  |
3.18 MB | Pakue | Siemenstraße | 3 |
| 09:56, 5 September 2017 | Wood-glue.jpg (file) |  |
177 KB | Lukas | a bottle of PVA wood glue | 1 |
| 14:58, 1 December 2021 | Wolverine in use.JPG (file) |  |
312 KB | Lukas | sharpening a woodturning gouge with the Wolverine jig | 1 |
| 15:00, 1 December 2021 | Wolverine base.JPG (file) |  |
598 KB | Lukas | our Wolverine jig without a grinder on top | 1 |
| 16:34, 11 September 2017 | Wired 'battery' pack.JPG (file) |  |
324 KB | Lukas | Bosch PSR 960 compatible power supply adapter based on an old NiCd battery pack (see Project:Semi-Cordless Drill for details) | 1 |
| 17:59, 11 September 2023 | Wire model scorpians.jpg (file) |  |
26 KB | Finno | An old project, recycling old copper wire from a house renovation | 1 |
| 01:07, 26 February 2020 | Wire mesh plywood - closeup.JPG (file) |  |
496 KB | Lukas | the structured side of wire mesh plywood along with some sawn or routed cross-sections | 1 |
| 09:54, 5 September 2017 | Wire brushes.JPG (file) |  |
94 KB | Lukas | == Summary == Brass (top) and steel (bottom) wire brushes. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 23:09, 9 June 2018 | Wing Nuts.jpg (file) |  |
903 KB | NitramLegov | 1 | |
| 16:29, 22 March 2021 | Window drilling holes.jpg (file) |  |
1.94 MB | Mfisch3r | 1 | |
| 16:26, 22 March 2021 | Window-cutting.jpg (file) |  |
141 KB | Mfisch3r | 1 | |
| 09:53, 30 October 2019 | Wild cherry logs sealed.jpg (file) |  |
550 KB | Lukas | Project:Drying Timber - two wild cherry logs shortly after cutting & sealing | 1 |
| 12:39, 2 November 2018 | Wiki media creation.JPG (file) |  |
338 KB | Lukas | two members creating media for our page on jigsaws | 1 |
| 00:19, 4 April 2024 | Wide DRT50 baseplate.jpg (file) |  |
4.93 MB | Lukas | custom baseplate for freehand routing with the Makita DRT50 | 1 |
| 09:55, 9 June 2019 | Wheel truing stand.JPG (file) |  |
584 KB | Lukas | Moritz donated a wheel truing stand to increase our scope of cycling related projects! | 1 |
| 23:46, 15 November 2022 | WhatsApp Bild 2022-11-15 um 22.38.23.jpg (file) |  |
402 KB | BenKenobi | 1 | |
| 17:44, 22 October 2018 | Westfalia router table off center.JPG (file) |  |
501 KB | Lukas | When we got the Westfalia router table, the router was mounted too far to the front so the bit would be off center - not that the scale on this simple table would have been too accurate anyway, but something we will fix nevertheless! | 1 |
| 17:41, 22 October 2018 | Westfalia router table fence-top.JPG (file) |  |
475 KB | Lukas | In addition to the fence, you should use additional guides on the router table whenever you can - shown here is a rigid top guide ''almost'' touching the workpiece, featherboards can actually press on it and are even safer! | 1 |
| 17:37, 22 October 2018 | Westfalia router table fence-X.JPG (file) |  |
478 KB | Lukas | The screw knob marked "X" should be left alone unless you really need it - it lets you move the left part of the fence back and forward on its own; for the majority of jobs on the router table (if not all) you want the fence to be perf... | 1 |
| 17:31, 22 October 2018 | Westfalia router table dust ports.JPG (file) |  |
441 KB | Lukas | there are two places where you can connect a shop vac to the Westfalia router table: top (green) - most useful for edge work - or bottom (black) - most useful for grooves | 1 |
| 19:00, 30 May 2020 | Werkstattordnung.pdf (file) |  |
153 KB | NitramLegov | 4 | |
| 13:44, 20 January 2024 | Welding transformer top right.jpg (file) |  |
4.33 MB | Lukas | Unknown Welding Transformer, top view (setting indicator is barely visible just above 70 A) | 1 |
| 13:42, 20 January 2024 | Welding transformer front.jpg (file) |  |
2.81 MB | Lukas | Unknown Welding Transformer, front view | 1 |
| 22:06, 28 April 2022 | Welding transformer.JPG (file) |  |
16.38 MB | NitramLegov | 2 | |
| 00:26, 24 January 2024 | Welding pressure gauge.jpg (file) |  |
1.89 MB | Johannes | 1 | |
| 13:21, 20 January 2024 | Welding gloves.jpg (file) |  |
79 KB | Lukas | Welding Gloves | 1 |
| 13:20, 20 January 2024 | Welding enclosure - outside.JPG (file) |  |
1.02 MB | Lukas | new photo after the 2023 re-opening in the new building | 2 |
| 16:37, 8 October 2023 | Welding enclosure - inside.JPG (file) |  |
4.53 MB | Lukas | 2023 update (indoors now!) | 2 |
| 09:52, 5 September 2017 | Weights not clamps.jpg (file) |  |
363 KB | Lukas | == Summary == It does not always have to be clamps: sometimes, adding enough weight to the board or sheet you want to saw through can secure it just as well and you don't have obstacles in your cutting path. == Licensing == {{CC... | 1 |
