Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
10:28, 9 June 2019 | Membership-icon.svg (file) | 4 KB | Icon made by [https://www.freepik.com/" Freepik] from [https://www.flaticon.com/ Flaticon] is licensed by [http://creativecommons.org/licenses/by/3.0/ Creative Commons BY 3.0] | 1 | |
09:55, 9 June 2019 | Wheel truing stand.JPG (file) | 584 KB | Moritz donated a wheel truing stand to increase our scope of cycling related projects! | 1 | |
09:48, 9 June 2019 | Horizontal bike repair.JPG (file) | 562 KB | bike held up horizontally by the bike repair stand on the frame and a vise (barely visible) on the crank ''(Kurbel)'' | 1 | |
09:31, 9 June 2019 | Bike repair stand.JPG (file) | 218 KB | our bike repair stand in the metal workshop | 1 | |
09:29, 9 June 2019 | CoMS banner + bike.JPG (file) | 344 KB | Besides its many other talents, the CoMakingSpace is also a great pleace for bicycle repairs and projects! | 1 | |
09:30, 8 June 2019 | CoMS Model 2017-9-14.JPG (file) | 82 KB | early version of Project:CoMS Model from 2017-9-14 (the night before we actually moved into Czernyring 15!) | 1 | |
02:04, 8 June 2019 | Sanding - furniture restoration.JPG (file) | 486 KB | a very common use for handheld sanders is the preparation of aged surfaces before new paint is applied | 1 | |
02:01, 8 June 2019 | Bierbankrettung Loch zu.JPG (file) | 424 KB | after getting a very cheap "beer table" with a hole in it, I plugged it with a custom cut piece of fir and sanded it flush after the wood glue was dry | 1 | |
01:55, 8 June 2019 | Eukalyptus saw handle rough shape.JPG (file) | 486 KB | shaping a saw handle out of leftovers from my "TAC" boardgame - the naked blade cost me just a few cents in the ''Recyclingkaufhaus'' next door! | 1 | |
17:58, 7 June 2019 | Wood photo stand.png (file) | 1.05 MB | simple but decorative holder for a wooden photo out of leftovers from my "TAC" boardgame | 1 | |
17:48, 7 June 2019 | Festival radio 01.JPG (file) | 490 KB | Project:Festival Radio The radio to be modified, a ''Studio'' Club 5007 | 1 | |
17:43, 7 June 2019 | Composting toilet from pallets.JPG (file) | 682 KB | composting toilet built almost entirely from pallet wood and other recycled materials | 1 | |
17:38, 7 June 2019 | Birgitts bible covers.JPG (file) | 404 KB | decorative bible covers I helped Birgitt make: laser engraved patterns and "holy" water/soil under acrylic glass | 1 | |
17:34, 7 June 2019 | Countersink wood drill bit holder.jpg (file) | 309 KB | a very quick project for ease of transport: a block of wood in a little pouch I found somewhere, drilled to hold my countersink wood drill bits | 1 | |
17:22, 7 June 2019 | Project wall border painting.JPG (file) | 389 KB | Project Wall in the making: Keno and Johannes applied a decorative border with spray paint and laser cut stencils | 1 | |
10:05, 4 June 2019 | Auger drill bit set.JPG (file) | 371 KB | Set of 10-12-14-16-18-20 mm auger bits in a wooden box. Note the rough lead screws: these drill bits are only suitable for hand use in a brace!<sup> [https://www.feinewerkzeuge.de/G312247v.html]</sup> | 1 | |
23:45, 29 May 2019 | Götterbaum-Reststück.JPG (file) | 293 KB | Project:Drying Timber leftover piece of Micha's "tree of heaven" log that Lukas will try to carve or turn when it is dry | 1 | |
23:26, 29 May 2019 | Wood screw - sunk partial tapping.svg (file) | 31 KB | Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or... | 1 | |
22:39, 29 May 2019 | Rali Wechselklingenhobel.jpg (file) | 906 KB | "Rali 220" repleaceable blade plane | 1 | |
20:32, 29 May 2019 | T-shank jigsaw blade.jpg (file) | 274 KB | T-shank jigsaw blade ''Stichsägeblatt mit T-Schaft'' | 1 | |
18:21, 29 May 2019 | Project wall preparation.jpg (file) | 599 KB | Keno and Ciaran taking down the "Project Wall" door for painting | 1 | |
23:38, 28 May 2019 | Laser-Tigerente 5.jpg (file) | 629 KB | Project:Tigerente laser engraved variation, step 5: final assembly with waxed body & wheels | 1 | |
23:35, 28 May 2019 | Laser-Tigerente 4.JPG (file) | 368 KB | Project:Tigerente laser engraved variation, step 4: the wood darkens slightly due to the beeswax | 1 | |
23:32, 28 May 2019 | Laser-Tigerente 3.JPG (file) | 427 KB | Project:Tigerente laser engraved variation, step 3: apply beeswax with a heatgun and some rags or paper towels | 1 | |
23:29, 28 May 2019 | Laser-Tigerente 2.JPG (file) | 404 KB | Project:Tigerente laser engraved variation, step 2: test assembly after cutting (on the scroll saw as usual and drilling | 1 | |
23:25, 28 May 2019 | Laser-Tigerente 1.JPG (file) | 424 KB | Project:Tigerente laser engraved variation, step 1: engrave your design with a laser cutter | 1 | |
23:19, 28 May 2019 | Eccentric sander motion.png (file) | 524 KB | an eccentric sander in motion (with schematic drawn over in Inkscape because you can't actually see what's happening) | 1 | |
22:53, 28 May 2019 | Screw marking gauge.JPG (file) | 255 KB | quick and dirty marking gauge made from a screw in a piece of scrap wood | 1 | |
18:39, 28 May 2019 | Bessey Winkelspanner.jpg (file) | 1.03 MB | two Bessey corner clamps (probably WS3) in use to assemble a simple cabinet Category:Furniture | 1 | |
15:09, 8 May 2019 | Schwenkgrill einklappen.gif (file) | 1.08 MB | Project:Schwenkgrill so einfach kann man den Grill zusammenklappen :-) (GIF mit [https://ezgif.com/ ezGIF.com] aus einem MP4-Video erstellt) | 1 | |
14:58, 8 May 2019 | Schwenkgrill 16.JPG (file) | 855 KB | Project:Schwenkgrill letzter Schritt: Feuer drunter & guten Hunger! | 1 | |
14:06, 8 May 2019 | Schwenkgrill 15.JPG (file) | 404 KB | Project:Schwenkgrill nach einem fehlgeschlagenen Versuch mit Vorhanghaken wurden die Enden der Kette mit Schlüsselringen am Rost festgemacht (passende Karabiner wären noch besser) | 1 | |
14:04, 8 May 2019 | Schwenkgrill 14.JPG (file) | 492 KB | Project:Schwenkgrill ein Stück Kette am Ende des Drahtseils kann zur Höhenverstellung an zwei Flügelmuttern verhakt werden | 1 | |
14:02, 8 May 2019 | Schwenkgrill 13.JPG (file) | 447 KB | Project:Schwenkgrill in die "W"-Bögen hineinragende Enden eines weiteren Stücks Bewehrungsstahl müssen abgeschnitten werden, um nicht im Weg zu sein | 1 | |
13:58, 8 May 2019 | Schwenkgrill 12.JPG (file) | 414 KB | Project:Schwenkgrill um das "W", das die Bewegung des Dreibeins am idealen Punkt stoppen soll, in der richtigen Position anzuschweißen, sollte man sich lieber ein paar helfende Hände holen... | 1 | |
13:55, 8 May 2019 | Schwenkgrill 11.JPG (file) | 413 KB | Project:Schwenkgrill Testaufbau zur Ausrichtung des "W"-Stücks | 1 | |
13:33, 8 May 2019 | Schwenkgrill 10.JPG (file) | 430 KB | Project:Schwenkgrill der Bewehrungsstahl wird in eine (ungefähr) symmetrische "W"-Form gebogen | 1 | |
13:29, 8 May 2019 | Schwenkgrill 09.JPG (file) | 396 KB | Project:Schwenkgrill mit einem Bohrschleifer können kleine rechteckige Aussparungen für die Umlenkrolle in das mittlere Rohr geschnitten werden | 1 | |
13:26, 8 May 2019 | Schwenkgrill 08.JPG (file) | 427 KB | Project:Schwenkgrill ein großer Stufenbohrer gibt einen ganz passablen handgeführten Entgrater ab... | 1 | |
13:18, 8 May 2019 | Schwenkgrill 07.JPG (file) | 468 KB | Project:Schwenkgrill die flachgedrückten Stellen werden mit einem Stufenbohrer weit aufgebohrt, um sich gut um die Gewindestange bewegen zu können | 1 | |
13:16, 8 May 2019 | Schwenkgrill 06.JPG (file) | 503 KB | Project:Schwenkgrill Die beiden äußeren Stahlrohre werden an einem Ende im Schraubstock flachgedrückt | 1 | |
13:14, 8 May 2019 | Schwenkgrill 05.JPG (file) | 453 KB | Project:Schwenkgrill Bohrlöcher in Metall am besten immer gleich entgraten, um sich nicht zu verletzen! | 1 | |
13:12, 8 May 2019 | Schwenkgrill 04.JPG (file) | 503 KB | Project:Schwenkgrill um in die Stahlrohre zu bohren sind ein Maschinenschraubstock und eine Tischverlängerung sinnvoll | 1 | |
13:10, 8 May 2019 | Schwenkgrill 03.JPG (file) | 458 KB | Project:Schwenkgrill die Umlenkrolle braucht eine Bohrung für die Gewindestange (am besten schön zentriert auf der Drechselbank) | 1 | |
13:04, 8 May 2019 | Schwenkgrill 02.JPG (file) | 459 KB | Project:Schwenkgrill optional, aber cool: Umlenkrolle aus Buche drechseln | 1 | |
12:58, 8 May 2019 | Schwenkgrill 01.JPG (file) | 356 KB | Project:Schwenkgrill (fast) das gesamte Material zu Beginn | 1 | |
17:26, 2 May 2019 | Abused woodturning tools.JPG (file) | 380 KB | woodturning tools that were abused and bent :-( | 1 | |
17:15, 2 May 2019 | Panel carrying.JPG (file) | 433 KB | using panel carriers to move a large workpiece out of the CoMaking room | 1 | |
17:08, 2 May 2019 | Panel carriers.JPG (file) | 301 KB | two panel carriers on a table | 1 | |
16:57, 2 May 2019 | Fretsaws.JPG (file) | 463 KB | two fretsaws (one without a blade) on the wall | 1 |