Sheet Sanders
| MachineInfoBox Sheet Sanders | |
|---|---|
| |
| Synonyms: | orbital finishing sanders; DE: Schwingschleifer, Rutscher |
| Material: | depends on sanding sheet (usually wood) |
| Used with: | sandpaper |
| Access Requirements: | Handheld Sander Introduction |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
| Similar (More or Less): | eccentric and other power sanders |
[[Has caption::power sanders| ]]
Sheet sanders have a square orbiting pad that lets you reach into corners and remove a similar amount of material as eccentric sanders. Because they lack the additional turning motion though, they are more prone to leaving sanding marks on your workpiece if you're not careful.
See also:
Bosch PSS 250 AE
| MachineInfoBox Bosch PSS 250 AE | |
|---|---|
| |
| Used with: | sandpaper - 93 × 185 mm (hook and loop) or 93 × 230 mm (plain, clamped) |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | ManualsLib |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
The Bosch PSS 250 AE can be used with hook-and-loop sandpaper strips, but regular ones can also be clamped in.
It has a "microfilter" that reduces airborne dust, but you should ideally use a shop vac (will fit in combination with the rubber adapter in the sander's case) and/or go outside and it does not hurt to still protect yourself with a dust mask. The sandpaper should have the appropriate holes for dust extraction to work, of course!
SKIL 7210 "Fox 2in1"
| MachineInfoBox SKIL 7210 "Fox 2in1" | |
|---|---|
| |
| Used with: | sandpaper - 93 × 185 mm (hook and loop) |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | skil.de |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
The SKIL 7210 is a "multi" sander that can also be equipped with a delta sander-like tip - unfortunately, that part is not included with the one we have.
This sander can only be used outside and with a dust mask at the moment, its bag only traps the relatively large dust particles! Perhaps this could be improved with a custom shop vac adapter.
DeWalt DW411
| MachineInfoBox DeWalt DW411 | |
|---|---|
| |
| Used with: | sandpaper - 115 × 110 mm (with 8 holes) |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | manualslib.com |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
We got a DeWalt DW411 palm sander (Faustschleifer) without a dust bag. A shop vac adapter should be made before using it inside!
Besides the dust issue, be aware that...
- there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
- holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring
Since we have multiple sheet sanders at the moment, this one is kept in storage as a backup but may be borrowed for private use over short periods of time - ask Patrick if you're interested!
Once we do need to put the tool into a shared room, the only commissioning step left to do is printing its QR code.
