ZJ5116 TB 16
From CoMakingSpace Wiki
ZJ5116 TB 16
MachineInfoBox ZJ5116 TB 16 | |
---|---|
Type: | Drill Presses |
Location: | Drilling Table |
Access Requirements: | Drill Introduction |
Status: | Working |
Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob |
- Drill bit sizes: 1-16mm (neues Futter)
- Transmission: 16 gear (170-3080rpm)
According to the sign on the machine and this document, the machine has the following (relevant) specs:
Specification | Value |
---|---|
Motor Power | 550 W |
Spindle Travel | 85 mm |
U/min | 170-3080 |
Spindle Taper | MT2 |
Table size | 290 mm × 290 mm |
Speed Chart
This chart was specifically created for the speeds that the machine can provide. You can find it taped to the right side of the machine. Not all speeds are used for this chart if you want/ need very precise control you should look up a more detailed table.