HBM AS188

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	Was bought as "Airbrush Kompressor Model ArtisticLife 188 (al188)" - tag on the machine itself says "AS 188"	Done
Take a picture	-	pending
Find the manual as PDF	For googling, please see the naming comment	pending
Documentation	this page, status: in commissioning	pending
Print QR-Code	use the wikicrawler	pending
Introduction	Airbrush Introduction	Started
Security Check	to be done or witnessed by a manager	done
Test	to be done or witnessed by a manager	???
tool's name, owner and approx. value	Provided to Patrick, waiting for internal documentation	pending
Last step: make it available	physically and in the wiki - then delete this template	pending

MachineInfoBox HBM AS188

Type:	Sliding Table Saw
Material:	Airbrush Paint
Location:	Wood Workshop
Access Requirements:	Airbrush Introduction
Status:	In Commissioning
Tutors:	Björn
Similar (More or Less):	Compressor

This compressor is dedicated to be used with airbrushing equipment and must not be used otherwise!

Manual

We're still looking for the PDF manual for this exact model. The manual for a similar model (AS-186) can be found here.

Specifications

boiler capacity: 3 liters
working pressure: 0.2 - 4 bar
engine power 150 watts / 1/6 HP.
number of cilinders: 1
voltage: 220 - 240 volts
noise level: approx. 50 dB (A)
net air yield: 23 L/minute
weight: 8.6 kg

Both connections have their own pressure regulator and pressure gauge.

Built-in Moisture separator in the tank.

Terminal and overpressure protection above 6 bar.

Oil-free compressor.

How to Connect an Airbrush to the Compressor

To connect the compressor hose to an airbrush, please use the adaptor piece. The compressor will keep its pressure even if no airbrush is connected.

Compressor Settings