Bambu Lab P1S (2)

From CoMakingSpace Wiki

Revision as of 18:55, 27 March 2024 by Pakue (talk | contribs) (Created page with "==Bambu Lab P1S (2)== {{MachineInfoBox |machine name=Bambu Lab P1S (2) |image= |synonyms= |type=3D Printer |material=plastic filament |location=Location::3D Printing Area |status=in commissioning |firmware= |software=Bambu Slicer |manual=[https://wiki.bambulab.com/en/p1/manual wiki.bambulab.com] |assetid=163 }}In addition to receiving a personal introduction from one of the tutors, make sure that you have read the [https://wiki.bambula...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Bambu Lab P1S (2)

MachineInfoBox

Bambu Lab P1S (2)

Machine-default.png
Type: 3D Printers
Material: plastic filament
Location: 3D Printing Area
Access Requirements: 3D Printer Introduction
Status: Working
Software: Bambu Slicer
Manual: wiki.bambulab.com
Tutors: Lukas
NitramLegov
Pakue
Mitja
Lmnl99
Johannes
Ciaran
Luzian
Leo
Narquadah
Kalunho
Björn 


In addition to receiving a personal introduction from one of the tutors, make sure that you have read the manual and use the latest version of Bambu Studio on the slicer PC.

The build volume of this model is 256 × 256 × 256 mm.

Retrieved from "https://wiki.comakingspace.de/index.php?title=Bambu_Lab_P1S_(2)&oldid=16802"