Drying Ovens
Memmert UM 400 (#2)
| MachineInfoBox Memmert UM 400 (#2) | |
|---|---|
| |
| Synonyms: | DE: Trockenöfen (Sg. Trockenofen) |
| Type: | Drying Ovens |
| Used with: | heat-resistant gloves |
| Location: | Hot Metal Area |
| Access Requirements: | |
| Status: | Working |
| Manual: | frankshospitalworkshop.com |
| Tutors: | |
| Similar (More or Less): | pizza oven |
According to the dials, this oven could reach a temperature of around 250°C. However, the nominal temperature according to the manufacturer is 220°C.
It has about 38 × 38 × 33 cm (width × height × depth) free space inside (about 2 cm more between the ridges on the sides, top and bottom).
Memmert UM 400 (#1)
| MachineInfoBox Memmert UM 400 (#1) | |
|---|---|
| |
| Synonyms: | DE: Trockenöfen (Sg. Trockenofen) |
| Type: | Drying Ovens |
| Used with: | heat-resistant gloves |
| Location: | 3D Printing Area |
| Access Requirements: | |
| Status: | Working |
| Manual: | frankshospitalworkshop.com |
| Tutors: | |
| Similar (More or Less): | pizza oven |
According to the dials, this oven could reach a temperature of around 250°C. However, the nominal temperature according to the manufacturer is 220°C.
It has about 38 × 38 × 33 cm (width × height × depth) free space inside (about 2 cm more between the ridges on the sides, top and bottom).
House Rules
Use common sense - a running oven consumes a lot of energy and can even be a fire hazard. Therefore, do not leave an oven running when you leave the Space!
Uses
Feel free to try whatever is safe, i.e. certainly won't damage the oven or any people!
So far, members have used these ovens to...
- melt plastic (only with good ventilation!)
- cure paint or epoxy more quickly
- dry moist filament before 3D printing
- shrink-fitting: expand one metal piece to insert a second one (e.g. a bearing) that's been contracted by cold
- ...?
It may also be possible to temper metal after hardening - has anyone tried?
