Biscuit Joiner
| MachineInfoBox Toolson PRO-DF 860 | |
|---|---|
| |
| Synonyms: | DE: Flachdübelfräsmaschine, Flachdübelfräse, Handschlitzfräse, Nutfräse, Lamellofräse |
| Material: | wood |
| Used with: | biscuits, wood glue |
| Access Requirements: | Biscuit Joiner Introduction |
| Manual: | media.bahag.com |
| Tutors: | Lukas Pakue |
| Similar (More or Less): | "Domino" joiner |
As mentioned in the Plenum, Sebastian brought in a biscuit joiner.
This tool is very useful for panel glue-ups, where the evenly placed biscuits make sure the individual boards surfaces stay aligned.
Example
In the example, two small boards have been used as a test / demonstration for the biscuit joiner:
Each board has two grooves made by the joiner, one of the grooves has a biscuit inserted.
This picture shows how the biscuit helps with keeping the board aligned while the joints are being glued.
Four grooves made with the joiner are visible, one has a biscuit inserted.
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | done |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | Done |
| Introduction | Biscuit Joiner Introduction | done |
| Security Check | User:Lukas with User:Lars | done |
| Test | User:Lukas watched Sebastian and User:Lars use it | done |
| tool's name, owner and approx. value | entered by Lukas | done |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
