All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 14:29, 30 December 2020 Lukas talk contribs created page File:Schalltür5.JPG (hier sind noch einmal die fertigen Aussparungen für das Schloss sichtbar - unbedingt gut testen, bevor Korrekturen durch den weiteren Zusammenbau schwieriger werden! Project:Schallschutztüren)
- 14:29, 30 December 2020 Lukas talk contribs uploaded File:Schalltür5.JPG (hier sind noch einmal die fertigen Aussparungen für das Schloss sichtbar - unbedingt gut testen, bevor Korrekturen durch den weiteren Zusammenbau schwieriger werden! Project:Schallschutztüren)
- 14:26, 30 December 2020 Lukas talk contribs created page File:Schalltür4.JPG (die Aussparung für das Einsteckschloss ''kann'' man zwar im verschraubten Zustand fräsen - denkt man aber rechtzeitig daran, kann die Latte einfach auf dem Frästisch bearbeitet werden! Project:Schallschutztüren)
- 14:26, 30 December 2020 Lukas talk contribs uploaded File:Schalltür4.JPG (die Aussparung für das Einsteckschloss ''kann'' man zwar im verschraubten Zustand fräsen - denkt man aber rechtzeitig daran, kann die Latte einfach auf dem Frästisch bearbeitet werden! Project:Schallschutztüren)
- 14:24, 30 December 2020 Lukas talk contribs created page File:Schalltür3.JPG (vor dem Verschrauben sollte das Einsteckschloss eingepasst werden - für den richtigen Sitz im Rahmen musste eine Vertiefung in die kleinere Platte gefräst werden Project:Schallschutztüren)
- 14:24, 30 December 2020 Lukas talk contribs uploaded File:Schalltür3.JPG (vor dem Verschrauben sollte das Einsteckschloss eingepasst werden - für den richtigen Sitz im Rahmen musste eine Vertiefung in die kleinere Platte gefräst werden Project:Schallschutztüren)
- 14:21, 30 December 2020 Lukas talk contribs created page File:Schalltür2.JPG (die beiden massiven Platten wurden mit einem leichten Rahmen als Mittelschicht verschraubt - mit einem Zirkel können solche Bohrungen ohne Rechnen gleichmäßig angeordnet werden Project:Schallschutztüren)
- 14:21, 30 December 2020 Lukas talk contribs uploaded File:Schalltür2.JPG (die beiden massiven Platten wurden mit einem leichten Rahmen als Mittelschicht verschraubt - mit einem Zirkel können solche Bohrungen ohne Rechnen gleichmäßig angeordnet werden Project:Schallschutztüren)
- 14:10, 30 December 2020 Lukas talk contribs created page 2019 (Redirected page to Pages created in 2019) Tag: New redirect
- 14:10, 30 December 2020 Lukas talk contribs created page 2020 (Redirected page to Pages created in 2020) Tag: New redirect
- 12:33, 30 December 2020 Lukas talk contribs created page Frässchablone (Redirected page to Router Jigs) Tag: New redirect
- 12:31, 30 December 2020 Lukas talk contribs created page File:Schalltür1.JPG (sobald eine Tür auf den Rahmen zugeschnitten war, wurden die Bänder eingedreht um den Sitz möglichst früh testen und ggf. verbessern zu können Project:Schallschutztüren)
- 12:31, 30 December 2020 Lukas talk contribs uploaded File:Schalltür1.JPG (sobald eine Tür auf den Rahmen zugeschnitten war, wurden die Bänder eingedreht um den Sitz möglichst früh testen und ggf. verbessern zu können Project:Schallschutztüren)
- 12:21, 30 December 2020 Lukas talk contribs created page Schallschutztüren (Redirected page to Project:Schallschutztüren) Tag: New redirect
- 12:18, 30 December 2020 Lukas talk contribs created page File:Schalltür0.JPG ("Baustelle" für unsere Schallschutztüren kurz vor Fertigstellung)
- 12:18, 30 December 2020 Lukas talk contribs uploaded File:Schalltür0.JPG ("Baustelle" für unsere Schallschutztüren kurz vor Fertigstellung)
- 11:27, 30 December 2020 Lukas talk contribs created page Silicone Caulk (Redirected page to Material:Silicone#Silicone Sealant) Tag: New redirect
- 11:23, 30 December 2020 Lukas talk contribs created page File:Fishcage3D.png (final snap ring design in Tinkercad - super fancy, I know! Project:Fish Cages)
- 11:23, 30 December 2020 Lukas talk contribs uploaded File:Fishcage3D.png (final snap ring design in Tinkercad - super fancy, I know! Project:Fish Cages)
- 11:16, 30 December 2020 Lukas talk contribs created page File:Fishcage7.JPG (the bottom ends of the cages were wet sanded until they were even enough to form a tight seal with the mesh & snap ring Project:Fish Cages)
- 11:16, 30 December 2020 Lukas talk contribs uploaded File:Fishcage7.JPG (the bottom ends of the cages were wet sanded until they were even enough to form a tight seal with the mesh & snap ring Project:Fish Cages)
- 11:10, 30 December 2020 Lukas talk contribs created page File:Fishcage6.JPG (the floaters were held underwater for a couple of days after washing with ethanol to get rid of the laser stench Project:Fish Cages)
- 11:10, 30 December 2020 Lukas talk contribs uploaded File:Fishcage6.JPG (the floaters were held underwater for a couple of days after washing with ethanol to get rid of the laser stench Project:Fish Cages)
- 11:02, 30 December 2020 Lukas talk contribs created page File:Fishcage5.JPG (all the parts after the "machine work" at the Space: tubes, floaters and snap rings Project:Fish Cages)
- 11:02, 30 December 2020 Lukas talk contribs uploaded File:Fishcage5.JPG (all the parts after the "machine work" at the Space: tubes, floaters and snap rings Project:Fish Cages)
- 10:57, 30 December 2020 Lukas talk contribs created page File:Fishcage4.JPG (laser cutting the floaters out of XPS Project:Fish Cages)
- 10:57, 30 December 2020 Lukas talk contribs uploaded File:Fishcage4.JPG (laser cutting the floaters out of XPS Project:Fish Cages)
- 10:49, 30 December 2020 Lukas talk contribs created page File:Fishcage3.JPG (a 3D printed snap ring that was just a bit too large - note the cracks forming in the acrylic glass tube Project:Fish Cages)
- 10:49, 30 December 2020 Lukas talk contribs uploaded File:Fishcage3.JPG (a 3D printed snap ring that was just a bit too large - note the cracks forming in the acrylic glass tube Project:Fish Cages)
- 10:44, 30 December 2020 Lukas talk contribs created page File:Fishcage2.JPG (The initial plan was to glue the mesh directly onto the cut face of the acrylic tube, but I did not know the material (probably a non-gluable plastic) and therefore failed quickly. Project:Fish Cages)
- 10:44, 30 December 2020 Lukas talk contribs uploaded File:Fishcage2.JPG (The initial plan was to glue the mesh directly onto the cut face of the acrylic tube, but I did not know the material (probably a non-gluable plastic) and therefore failed quickly. Project:Fish Cages)
- 10:34, 30 December 2020 Lukas talk contribs created page File:Fishcage0.JPG (a floating "fish cage" with some tiny zebrafish larvae inside Project:Fish Cages)
- 10:34, 30 December 2020 Lukas talk contribs uploaded File:Fishcage0.JPG (a floating "fish cage" with some tiny zebrafish larvae inside Project:Fish Cages)
- 10:25, 30 December 2020 Lukas talk contribs created page File:Bandsaw sled guides.JPG (some 3D printed T-slot guides were screwed into the bandsaw sled at just the right places for nice tracking on the machine table)
- 10:25, 30 December 2020 Lukas talk contribs uploaded File:Bandsaw sled guides.JPG (some 3D printed T-slot guides were screwed into the bandsaw sled at just the right places for nice tracking on the machine table)
- 10:18, 30 December 2020 Lukas talk contribs created page File:Bandsaw sled without clamps.JPG.jpg
- 10:18, 30 December 2020 Lukas talk contribs uploaded File:Bandsaw sled without clamps.JPG.jpg
- 10:12, 30 December 2020 Lukas talk contribs created page File:Bandsaw sled.JPG (clamps can be used with a bandsaw sled for maximum safety, e.g. when there is a high danger of round stock rolling around)
- 10:12, 30 December 2020 Lukas talk contribs uploaded File:Bandsaw sled.JPG (clamps can be used with a bandsaw sled for maximum safety, e.g. when there is a high danger of round stock rolling around)
- 01:44, 28 December 2020 Luzian talk contribs created page Project:Fix Watch Movement Citizen 8200 (documented project "fix watch") Tag: Visual edit
- 01:40, 28 December 2020 Luzian talk contribs created page File:Escape wheels.webp (the bottom one is missing it's barring pin. the top was sold as an authentic new part and is still packed.)
- 01:40, 28 December 2020 Luzian talk contribs uploaded File:Escape wheels.webp (the bottom one is missing it's barring pin. the top was sold as an authentic new part and is still packed.)
- 23:35, 27 December 2020 Johannes talk contribs created page Project:LED Cube 5x5x5 (Created page with "== Idee == Die Idee war es einen Led Cube zu bauen. {{ProjectInfoBox|project title=LED Cube 5x5x5|image=LED Cube 5x5x5 green.jpg|status=noch nicht fertig|initiator={{j}}|mate...") Tag: Visual edit
- 22:58, 27 December 2020 Johannes talk contribs created page File:LED Cube 5x5x5 PCB unten.jpg
- 22:58, 27 December 2020 Johannes talk contribs uploaded File:LED Cube 5x5x5 PCB unten.jpg
- 22:51, 27 December 2020 Johannes talk contribs created page File:LED Cube 5x5x5 Spannungsversorgung.jpg
- 22:51, 27 December 2020 Johannes talk contribs uploaded File:LED Cube 5x5x5 Spannungsversorgung.jpg
- 22:46, 27 December 2020 Johannes talk contribs created page File:LED Cube 5x5x5 Datenleitungen.jpg
- 22:46, 27 December 2020 Johannes talk contribs uploaded File:LED Cube 5x5x5 Datenleitungen.jpg
- 22:06, 27 December 2020 Johannes talk contribs created page File:LED cube 5x5x5 pcb.jpg