Wood Lathes
| MachineInfoBox Wood Lathe | |
|---|---|
| |
| Synonyms: | woodturning lathe; DE: Drechselbank, Drechselmaschine |
| Material: | wood |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Similar (More or Less): | metal lathe |
[[Has caption::lathe| ]]
We have wood lathes in the wood workshop that we can use as an entry to woodturning - if a community of turning enthusiasts develops and the machines becomes too weak for more ambitious projects, we'll have to think about replacing them with a professional model.
Güde 1000
| MachineInfoBox Güde 1000 | |
|---|---|
| |
| Synonyms: | woodturning lathe; DE: Drechselbank, Drechselmaschine |
| Material: | wood |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Manual: | Guede.com |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Similar (More or Less): | metal lathe |
[[Has caption::lathe| ]]
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Güde 1000 | Done |
| Take a picture | - | Done |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | Done |
| Documentation | Martin: See github for details on what is still missing. | pending |
| Print QR-Code | use the wikicrawler | done |
| Introduction | Woodturning Introduction | done |
| Security Check | Lukas | done |
| Test | Lukas | done |
| tool's name, owner and approx. value | provide to Patrick for inventorization | done |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
Specs
- max. workpiece diameter: 320 mm
- max. workpiece length: 1000 mm
- spindle speeds: 850 - 1250 - 1750 - 2510 rpm
- motor: 370 W
- spindle thread: M18
- workholding options: drive center (Vielzack-Stirnmitnehmer/"Dornenkrone"), four-jaw chuck, faceplate
Speed selection
The lathe can run at various speeds depending on which pulleys are connected by the belt (picture on the housing). Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!
Upgrades/Improvements
We should soon tweak this machine to improve usability:
- replace pulley adjustment and casing screws by thumbwheels or so
- add a clamping lever to the tool rest's nut
buy (or turn on the metal lathe) an 18 to 33 mm adapter (to match common accessories like faceplates)buy (or make) a faceplateMicha brought in enough accessories for the start :-)
Holzmann D460F
| MachineInfoBox Holzmann D460F | |
|---|---|
| |
| Synonyms: | woodturning lathe; DE: Drechselbank, Drechselmaschine |
| Material: | wood |
| Used with: | face shield, woodturning tools |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Similar (More or Less): | metal lathe |
[[Has caption::lathe| ]]
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Holzmann D460F | Done |
| Take a picture | - | Done |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | pending |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | Woodturning Introduction | done |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | Lukas | done |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
We have got another wood lathe, which needs some documentation before it can actually be used.
Specs
- max. workpiece diameter: ??
- max. workpiece length:??
- spindle speeds: ??
- motor: ??
- spindle thread: ??
- workholding options: ??
Speed selection
???
Upgrades/Improvements
????
