Project:TAC
| ProjectInfoBox "TAC" Boardgame | |
|---|---|
| |
| Status: | final tweaks & documentation |
| Release Date: | (mainly) summer 2018 |
| Initiator: | Flo |
| Team: | Daniel, Lukas |
| Materials Used: | glued laminated timber (Eucalyptus diversicolor - Karri); TAC cards & marbles, (optional) felt |
| Tools Used: | CNC router, table saw, router table, sandpaper |
| Software Used: | Fusion 360 |
| Approx. Cost: | 40 € |
One of Lukas' colleagues kept talking about the game TAC whose inventors offered really nice & expensive deluxe boards but also sets of everything except the board, so they started to make some boards of their own.
intended mainly as an inspiration page for now, but please ask if you have any questions!
Gallery
preparing to cut a practice piece from one of our stock boards
design of the practice piece with all the needed shapes in Fusion 360
(partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!
on to the full game - design in Fusion 360
partially routed 6-player board on the WorkBee
back to pictures of the 4-player game: undecorated version completely routed
the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router
