Belt and Disc Sander
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
Holzmann BT 203_914
This machine will sit in the metal workshop, next the the grinding stones on a wooden box containing the manual and accessories after commissioning.
It is a combined disc and belt sander with a 200mm rough sanding disc and a 914x100mm belt sander. Both are always simultaneously driven by the 550W motor. Belt speed is 9,5m/s and disc speed is 2850 min-1.
This type of machine is helpful for all sanding tasks that require a fixed angle. Both sander sides have adjustable sanding tables and a slot for a miter gauge to guide your workpiece in a defined agle against the sanding disc or belt.
| MachineInfoBox Holzmann BT 203_914 | |
|---|---|
| |
| Used with: | 914x100mm sanding belts 200mm sanding discs (glued) |
| Access Requirements: | Stationary Sander IntroductionSome use of "" in your query was not closed by a matching "". |
| Manual: | in wooden box below grinder |
| Tutors: | Lukas Pakue Johannes Luzian Utis Sebastian JakobSome use of "" in your query was not closed by a matching "". |
Features
As by the producer, the machine has the following features
- pivoting aluminium table for disc and belt sander (up to 45°)
- sanding belt unit tiltable from 0-90° horizontally and vertically
- mitre fence for precise angle sanding
- suction device
- fast and easy belt change due to quick clamping device
- suitable for longitudinal and front edges, round and mitre sanding and plane faces
The following is included in the delivery: 1 sanding belt, 1 sanding disc, mitre gauge, 2x ALU-table.
In the original version, the sanding disk is glued. After modification, it is possible to install velcro-backed abrrasive discs.
Refer to the manual to learn more about how you can change parameters or table-angles.
Commissioning
…This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | Done |
| Find the manual as PDF | no pdf found | in wooden box below sander |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | Belt and Disc Sander Introduction | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provided by Martin | Done |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
