Prusa i3 MK2S (1): Difference between revisions
From CoMakingSpace Wiki
(linked introduction) |
No edit summary |
||
| Line 27: | Line 27: | ||
** no sensing of obstacles or current position! | ** no sensing of obstacles or current position! | ||
== Maintenance == | |||
See [[3D_Printer_Farm#Maintenance]]. | |||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 14:22, 31 March 2018
| MachineInfoBox Original Prusa i3 MK2S | |
|---|---|
| |
| Synonyms: | Prusa i3 MK2 (nearly identical) |
| Material: | plastic filament |
| Access Requirements: | |
| Firmware: | https://www.prusa3d.com/drivers/ |
| Software: | Slic3r Prusa Edition |
| Manual: | prusa3d.com |
| Tutors: | |
The Prusa i3 MK2S is our default 3D printer in the 3D printer farm. We have five of them, named "P1" through "P5".
In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.
Dangers
- exposed heated parts - may still be hot if the display is already turned off!
- the print head reaches temperatures up to 230 °C during operation
- the bed reaches temperatures up to 100 °C during operation
- machine parts may rapidly change direction - do not reach in when a print is running!
- machine may keep executing its commands after something went wrong
- every move is based on the initial homing ("zero-ing")
- no sensing of obstacles or current position!
