Prusa i3 MK2S (1): Difference between revisions
From CoMakingSpace Wiki
(added photo) |
(linked introduction) |
||
| Line 6: | Line 6: | ||
|material=plastic [[filament]] | |material=plastic [[filament]] | ||
|location=[[3D Printer Farm|3D printer farm]] | |location=[[3D Printer Farm|3D printer farm]] | ||
|access=upon introduction | |access=upon [[3D Printer Introduction|introduction]] | ||
|status=see [[3D Printer Farm#Available Printers|list]] | |status=see [[3D Printer Farm#Available Printers|list]] | ||
|firmware=https://www.prusa3d.com/drivers/ | |firmware=https://www.prusa3d.com/drivers/ | ||
| Line 16: | Line 16: | ||
The Prusa i3 MK2S is our default 3D printer in the [[3D Printer Farm|3D printer farm]]. We have five of them, named "P1" through "P5". | The Prusa i3 MK2S is our default 3D printer in the [[3D Printer Farm|3D printer farm]]. We have five of them, named "P1" through "P5". | ||
In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf handbook] and use the latest version of [[Slic3r]] available at the [https://www.prusa3d.com/drivers/ drivers and manuals page]. | |||
== Dangers == | == Dangers == | ||
* the print head reaches temperatures up to 230 °C during operation | * exposed heated parts - may still be hot if the display is already turned off! | ||
* the bed reaches temperatures up to 100 °C during operation | ** the print head reaches temperatures up to 230 °C during operation | ||
** the bed reaches temperatures up to 100 °C during operation | |||
* machine parts may rapidly change direction - do not reach in when a print is running! | * machine parts may rapidly change direction - do not reach in when a print is running! | ||
* machine may keep executing its commands after something went wrong | |||
** every move is based on the initial homing ("zero-ing") | |||
** no sensing of obstacles or current position! | |||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 12:02, 3 March 2018
| MachineInfoBox Original Prusa i3 MK2S | |
|---|---|
| |
| Synonyms: | Prusa i3 MK2 (nearly identical) |
| Material: | plastic filament |
| Access Requirements: | |
| Firmware: | https://www.prusa3d.com/drivers/ |
| Software: | Slic3r Prusa Edition |
| Manual: | prusa3d.com |
| Tutors: | |
The Prusa i3 MK2S is our default 3D printer in the 3D printer farm. We have five of them, named "P1" through "P5".
In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.
Dangers
- exposed heated parts - may still be hot if the display is already turned off!
- the print head reaches temperatures up to 230 °C during operation
- the bed reaches temperatures up to 100 °C during operation
- machine parts may rapidly change direction - do not reach in when a print is running!
- machine may keep executing its commands after something went wrong
- every move is based on the initial homing ("zero-ing")
- no sensing of obstacles or current position!
