Hole Saws: Difference between revisions
From CoMakingSpace Wiki
m (a.k.a. Lochkranzbohrer) |
m (Lukas moved page Wanted:Hole Saws to Hole Saws over a redirect without leaving a redirect: we bought a set!) |
Revision as of 03:01, 3 March 2018
This is a wish list page - we don't have this tool yet!
| ToolInfoBox Hole Saws | |
|---|---|
| |
| Synonyms: | hole cutter bits; DE: Lochsägen, Kreisbohrer, Dosenbohrer, Bohrkronen, Topfsägen, Lochkranzbohrer |
| Type: | bits/saws |
| Material: | depends on type (wood, concrete or even metals) |
| Used with: | drills |
| Access Requirements: | upon introduction |
| Tutors: | Lukas |
Hole saws are drill bits that consist of a saw blade holder and a central pilot drill which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time.
There is significant kickback when (mis-)using this tool, take the time do it right!
Proper Use
Use a drill at high speed but little pressure.
No hammering drill can be used to saw holes.
Besides keeping the saws intact, please take personal safety precautions and wear safety goggles!
