Bosch GEX 40-150 (1): Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m NitramLegov moved page Bosch GEX 40-150 to Bosch GEX 40-150 (1) |
NitramLegov (talk | contribs) m →Bosch GEX 40-150: page name |
||
| Line 1: | Line 1: | ||
== Bosch GEX 40-150 == | |||
== Bosch GEX 40-150 (1) == | |||
{{MachineInfoBox | {{MachineInfoBox | ||
|machine name=Bosch GEX 40-150 | |machine name=Bosch GEX 40-150 | ||
Revision as of 12:36, 12 January 2026
Bosch GEX 40-150 (1)
| MachineInfoBox Bosch GEX 40-150 | |
|---|---|
| |
| Type: | Eccentric Sanders |
| Material: | wood |
| Used with: | 150 mm Sanding Discs |
| Location: | Office |
| Access Requirements: | Handheld Sander Introduction |
| Status: | Broken |
| Manual: | manuall.de |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
This eccentric sander can use 150 mm sanding discs with many holes (Multiloch).
Sanding Disc Protector
The sanding disc protector significantly extends the service life of the backing pad. As a strong protective layer with Velcro fastening, it optimises the adhesion between the sanding disc and the backing pad, especially when working with heavy loads and heavy-duty work. It should be used for normal sanding to protect the backing pad.
Interface-Pad IP-STF D150/MJ2-15/1
The interface pad has a diameter of 145 mm and a height of 15 mm. It is ideal for sanding work on heavily rounded components, furniture and also for filler sanding during finish sanding. The pad acts as a cushion between the sanding disc and sanding plate, minimising the risk of sanding through edges.
