Festool TS 75 EBQ: Difference between revisions
NitramLegov (talk | contribs) m (Text replacement - "|Asset ID=" to "|assetid=") |
|||
| Line 27: | Line 27: | ||
* cable | * cable | ||
* 1400 mm rail | * 2x 1400 mm rail | ||
* systainer (aka. fancy Festool box) | * systainer (aka. fancy Festool box) | ||
* manual | * manual | ||
* splinter guard (green thingy with nut and black thing with screw) | * splinter guard (green thingy with nut and black thing with screw) | ||
*SYS3 M 137 FS/2 Set | |||
**FS-WA angle stop | |||
**2 clamps | |||
**rail extension | |||
**cable/vacuum hose guard | |||
==== FS-WA angle stop ==== | |||
Used to get an adjustable ±60° angle stop on a guide rail. Handy repeated cuts on a board. | |||
[[File:FS-WA angle stop.jpg|left|thumb|FS-WA angle stop]] | |||
[[File:FS-WA angle stop install 1.jpg|left|thumb|Parallel jaws across the upper slot. Guide insert into the lower slot.]] | |||
[[File:FS-WA angle stop install 2.jpg|left|thumb|Clamp onto the inside of the upper slot.]] | |||
[[File:FS-WA angle stop edge extension.jpg|left|thumb|Edge extension for thicker boards and or large chamfers/fillets.]] | |||
[[File:FS-WA angle stop edge extension placement 1.jpg|left|thumb|Insert the two edge extensions into the slot closer to the board edge and screw it down.]] | |||
[[File:FS-WA angle stop edge extension placement 2.jpg|left|thumb|Final placement.]] | |||
Revision as of 22:07, 9 December 2022
Festool TS 75 EBQ - Plunge Saw
| MachineInfoBox Festool TS 75 EBQ | |
|---|---|
| |
| Synonyms: | plunge saw, plunge-cut saw, track saw; DE: Tauchsäge |
| Type: | Handheld Circular Saws |
| Material: | wood |
| Location: | Saw Station |
| Access Requirements: | Handheld Circular Saw Introduction |
| Status: | Working |
| Manual: | manualslib.com (or ZIP from festool.de |
| Tutors: | Lukas NitramLegov Pakue Johannes Luzian Keno Utis |
The Festool TS 75 EBQ is a plunge saw, that allows, in addition to normal circular saw functions, to be pushed downwards into the workpiece. The maximal depth is 75 mm and can be adjusted in 1 mm increments.
Make sure to remove the riving knife (Spaltkeil) before a plunge cut, it will get in the way!
Guide Rail
The saw can be used with a Festool guide rail for ease of use. Currently we have a single 1400 mm rail, but in the future multiple ones can be joined together to cut any length wished.
To avoid kickback during plunging, an endstop can be attached to the rail. When not in use it is attached to the backside of the saw.
Available Equipment
Besides the saw itself, we currently have:
- cable
- 2x 1400 mm rail
- systainer (aka. fancy Festool box)
- manual
- splinter guard (green thingy with nut and black thing with screw)
- SYS3 M 137 FS/2 Set
- FS-WA angle stop
- 2 clamps
- rail extension
- cable/vacuum hose guard
FS-WA angle stop
Used to get an adjustable ±60° angle stop on a guide rail. Handy repeated cuts on a board.
