Biscuit Joiner

MachineInfoBox Toolson PRO-DF 860
Synonyms:	DE: Flachdübelfräsmaschine, Flachdübelfräse, Handschlitzfräse, Nutfräse, Lamellofräse
Material:	wood
Used with:	biscuits, wood glue
Access Requirements:	Biscuit Joiner Introduction
Manual:	media.bahag.com
Tutors:	Lukas Pakue
Similar (More or Less):	"Domino" joiner

two small boards used as test for the biscuit joiner. Each board has two grooves made by the joiner, one of the grooves has a biscuit inserted.

two small boards used as test for the biscuit joiner. Shows how the biscuit helps with keeping the board aligned while the joints is being glued.

As mentioned in the Plenum, Sebastian brought in a biscuit joiner.

This tool is very useful for panel glue-ups, where the evenly placed biscuits prevent the individual boards from shifting.

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	-	done
Take a picture	-	done
Find the manual as PDF	needed for all machines - add a link to the InfoBox or comment where you could not find it	done
Documentation	this page, status: in commissioning	pending
Print QR-Code	use the wikicrawler	Done
Introduction	Biscuit Joiner Introduction	done
Security Check	User:Lukas with User:Lars	done
Test	User:Lukas watched Sebastian and User:Lars use it	done
tool's name, owner and approx. value	entered by Lukas	done
Last step: make it available	physically and in the wiki - then delete this template	pending

Two test boards side by side. Four grooves made with the joiner are visible, one has a biscuit inserted.