Prusa i3 MK2S (1): Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) added multi material printer - image needed |
NitramLegov (talk | contribs) m added image |
||
| Line 33: | Line 33: | ||
{{MachineInfoBox | {{MachineInfoBox | ||
|machine name=Original Prusa i3 MK2S Multi Material | |machine name=Original Prusa i3 MK2S Multi Material | ||
|image= | |image=MultiMaterialPrinter.JPG | ||
|type=3D printer with multi material support | |type=3D printer with multi material support | ||
|material=plastic [[filament]] | |material=plastic [[filament]] | ||
Revision as of 11:37, 20 June 2018
| MachineInfoBox Original Prusa i3 MK2S | |
|---|---|
| |
| Synonyms: | Prusa i3 MK2 (nearly identical) |
| Material: | plastic filament |
| Access Requirements: | |
| Software: | Slic3r Prusa Edition |
| Firmware: | https://www.prusa3d.com/drivers/ |
| Manual: | prusa3d.com |
| Tutors: | |
The Prusa i3 MK2S is our default 3D printer in the 3D printer farm. We have five of them, named "P1" through "P5".
In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.
Dangers
- exposed heated parts - may still be hot if the display is already turned off!
- the print head reaches temperatures up to 230 °C during operation
- the bed reaches temperatures up to 100 °C during operation
- machine parts may rapidly change direction - do not reach in when a print is running!
- machine may keep executing its commands after something went wrong
- every move is based on the initial homing ("zero-ing")
- no sensing of obstacles or current position!
Maintenance
See 3D_Printer_Farm#Maintenance.
| MachineInfoBox Original Prusa i3 MK2S Multi Material | |
|---|---|
| |
| Material: | plastic filament |
| Access Requirements: | |
| Software: | Slic3r Prusa Edition |
| Firmware: | https://www.prusa3d.com/drivers/ |
| Manual: | prusa3d.com |
| Tutors: | |
