WilTec 65414

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	-	Done
Take a picture	-	pending
Find the manual as PDF	needed for all machines - add a link to the InfoBox or comment where you could not find it	Done
Documentation	this page, status: in commissioning	Done
Print QR-Code	use the MachineQR Factory	pending
Introduction	-	Which would be appropriate?
Security Check	to be done or witnessed by a manager	pending
Test	to be done or witnessed by a manager	pending
tool's name, owner and approx. value	provide to Johannes for inventorization	pending
Last step: make it available	physically and in the wiki - then delete this template	pending

MachineInfoBox Wiltec 65414
Type:	Belt and Spindle Sander
Material:	Material:Wood
Used with:	Sanding Belts
Location:	Office
Access Requirements:	Stationary Sander Introduction
Status:	In Commissioning
Manual:	https://service.wiltec.de/manuals/65/65415/EN/65415-doc-en.pdf
Tutors:	Lukas Pakue Johannes Luzian Utis Sebastian Jakob
Similar (More or Less):	Belt and Disc Sander

The Wiltec Oscillating Spindle Sander offers professional sanding results, versatility, efficiency and precision in one compact sanding machine. This sander has a 500 W motor and a speed of 2000 rpm. The 16 mm oscillation height reduces friction and extends the lifespan of sanding sleeves, which makes it suitable for challenging woodworking tasks. Combining an oscillating spindle and a belt sander, this versatile sanding machine allows you to easily sand edges, curves and surfaces. The combination of rotation and vertical oscillation ensures an even finish with minimal effort.

The sanding table tilts up to 45°, which allows you to easily sand edges. This feature is useful for a wide range of woodwork tasks and also for working on complex projects that require a lot of details. The Wiltec Oscillating Spindle Sander includes five sanding sleeves (13-51 mm) for various sanding tasks: 51 mm (2″) 38 mm (1.5″) 26 mm (1″) 19 mm (0.75″) and 13 mm (0.5″).

Spindle Sander Manual

Use as spindle sander

Insert the bench insert (10) into the workbench (4). Place the fan wheel (26) with the flat side down on the spindle (11). Note! Ensure it is firmly in place. You may need to manually rotate the fan wheel (26) slightly to seat it correctly. Select the appropriate bench insert (22) for the sanding roller (21). Note! The size specifications of the bench insert and the sanding roller must match. The sizes of the bench inserts and sanding rollers are indicated under the corresponding storage (6) on the device. Insert the appropriate bench insert (22) into the recess of the bench insert (10). Place the sanding roller (21) on the spindle (11). Attach one of the matching washers (24/25/27) or no washer to the spindle (11). Hand-tighten the nut (23) onto the spindle (11) using the open-end spanner (18)

Use as belt run

Spindle Sander

The belt run can be corrected using the adjusting screw (1) or the sanding belt lever (2). Note! The sanding belt must not be allowed to sand on the workbench (4) or the bench insert (10) when the machine is running, otherwise the sanding belt will be damaged.

If the sanding belt moves, it must be minimally adjusted via the adjusting screw (1). To push the sanding belt upwards, turn the adjusting screw (1) clockwise. To move it down, turnthe adjusting screw (1) counterclockwise.

If the sanding belt shifts significantly, the position of the sanding belt must be corrected using the sanding belt lever (2) and then finely adjusted using the adjusting screw (1).

Spindle Sander