Bambu Lab P1S (1): Difference between revisions
From CoMakingSpace Wiki
(Created page with "==Bambu Lab P1S (1)== {{MachineInfoBox |machine name=Bambu Lab P1S (1) |image= |synonyms= |type=3D Printer |material=plastic filament |location=Location::3D Printing Area |status=in commissioning |firmware= |software=Bambu Slicer |manual=[https://wiki.bambulab.com/en/p1/manual wiki.bambulab.com] |assetid=162 }}In addition to receiving a personal introduction from one of the tutors, make sure that you have read the [https://wiki.bambula...") |
|||
| Line 14: | Line 14: | ||
}}In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [https://wiki.bambulab.com/en/p1/manual manual] and use the latest version of Bambu Studio on the slicer PC. | }}In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [https://wiki.bambulab.com/en/p1/manual manual] and use the latest version of Bambu Studio on the slicer PC. | ||
The build volume of this model is 256{{x}}256{{x}}256 mm. | The build volume of this model is 256{{x}}256{{x}}256 mm. <br clear=all> | ||
Revision as of 17:28, 29 March 2024
Bambu Lab P1S (1)
| MachineInfoBox Bambu Lab P1S (1) | |
|---|---|
| |
| Type: | 3D Printers |
| Material: | plastic filament |
| Location: | 3D Printing Area |
| Access Requirements: | 3D Printer Introduction |
| Status: | Working |
| Software: | Bambu Slicer |
| Manual: | wiki.bambulab.com |
| Tutors: | Lukas NitramLegov Pakue Mitja Lmnl99 Johannes Ciaran Luzian Leo Narquadah Kalunho Björn |
In addition to receiving a personal introduction from one of the tutors, make sure that you have read the manual and use the latest version of Bambu Studio on the slicer PC.
The build volume of this model is 256 × 256 × 256 mm.
