BAMATO AB-550: Difference between revisions

From CoMakingSpace Wiki

m (Text replacement - "|Asset ID=" to "|assetid=")
m (→‎BAMATO AB-550: extrabox (should not appear in machine gallery))
Line 14: Line 14:
|used with=[[Hearing Protection|hearing protection]], [[Breathing Protection|breathing protection]]
|used with=[[Hearing Protection|hearing protection]], [[Breathing Protection|breathing protection]]
|similar=[[Shop Vacs|shop vacs]]
|similar=[[Shop Vacs|shop vacs]]
|extrabox=yup
}}
}}



Revision as of 10:41, 17 December 2023

BAMATO AB-550

MachineInfoBox

BAMATO AB-550

Bamato.jpg
Synonyms: vacuum extractor, vacuum extraction machine
DE: Absauganlage
Type: Dust Extractors
Material: wood & similar dust (not sparks!)
Used with: hearing protection, breathing protection
Location: Wood Workshop
Access Requirements:
Status: In Commissioning
Manual: in the bag; nearly identical: Einhell TE-VE 550 A
(the BAMATO does not have an automatic power outlet)
Tutors:
Similar (More or Less): shop vacs




Caution - in its factory state, this machine does NOT have a fine dust filter! If used for tasks like sanding, it may even spread the fine dust more than if you had not used it at all. It is therefore mainly suitable for the extraction of larger chips and does NOT replace a dust mask.

Maintenance

UNPLUG before you do any maintenance

It should easily suck up smaller chips and saw dust from a surface if the pipe opening is placed perpendicular to the surface. If this is not the case you will have to service it. Over time larger chips that are sucked up don´t make it in to the rotor and clog the airway. They can usually be removed by disconnecting the pipe from the rotor and clearing the nest manually. Also the white fabric filter gets clogged over time and should be cleaned to. If the filter inflates like a bouncy castle upon turning it on, it is time to clean it. Wear a dust mask .
Obviously the plastic bag needs to be emptied when full.


This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: done BAMATO AB-550
Take a picture - done
Find the manual as PDF nearly the same as Einhell TE-VE 550 A done
Documentation should contain dangers/precautions, basic facts (adapter sizes, power) and how to empty the bag pending
Print QR-Code use the wikicrawler pending
Introduction not needed -
Security Check Lukas done
Test Lukas done
tool's name, owner and approx. value entered by Lukas done
Last step: make it available physically and in the wiki - then delete this template pending