Bosch GEX 40-150: Difference between revisions
From CoMakingSpace Wiki
| Line 23: | Line 23: | ||
Interface-Pad IP-STF D150/MJ2-15/1 | === Interface-Pad IP-STF D150/MJ2-15/1 === | ||
The interface pad has a diameter of 145 mm and a height of 15 mm. It is ideal for sanding work on heavily rounded components, furniture and also for filler sanding during finish sanding. The pad acts as a cushion between the sanding disc and sanding plate, minimising the risk of sanding through edges. | The interface pad has a diameter of 145 mm and a height of 15 mm. It is ideal for sanding work on heavily rounded components, furniture and also for filler sanding during finish sanding. The pad acts as a cushion between the sanding disc and sanding plate, minimising the risk of sanding through edges. | ||
[[File:Interface Pad Sanding.png|left|thumb|Interface Pad Sanding]] | [[File:Interface Pad Sanding.png|left|thumb|Interface Pad Sanding]] | ||
Revision as of 18:18, 4 May 2025
Bosch GEX 40-15
| MachineInfoBox Bosch GEX 40-150 | |
|---|---|
| |
| Type: | Eccentric Sanders |
| Material: | wood |
| Used with: | 150 mm Sanding Discs |
| Location: | Sanding Area |
| Access Requirements: | Handheld Sander Introduction |
| Status: | Working |
| Manual: | manuall.de |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
This eccentric sander can use 150 mm sanding discs with many holes (Multiloch).
Sanding disc protector
The sanding disc protector significantly extends the service life of the backing pad. As a strong protective layer with Velcro fastening, it optimises the adhesion between the sanding disc and the backing pad, especially when working with heavy loads and heavy-duty work. It should be used for normal sanding to protect the backing pad.
Interface-Pad IP-STF D150/MJ2-15/1
The interface pad has a diameter of 145 mm and a height of 15 mm. It is ideal for sanding work on heavily rounded components, furniture and also for filler sanding during finish sanding. The pad acts as a cushion between the sanding disc and sanding plate, minimising the risk of sanding through edges.
