Tyme Avon: Difference between revisions

From CoMakingSpace Wiki
m (→‎Tyme Avon: german)
 
(17 intermediate revisions by 2 users not shown)
Line 2: Line 2:
== Tyme Avon ==
== Tyme Avon ==
{{MachineInfoBox
{{MachineInfoBox
|machine name=Tyme Avon
|machine name=Tyme Avon ATL301
|image=
|image=Tyme Avon ATL301.jpg
|type=Wood Lathe
|type=Wood Lathe
|german=Drechselbank
|material=[[Woodturning Blanks|woodturning blanks]]
|material=[[Woodturning Blanks|woodturning blanks]]
|location=[[Location::Wood Workshop|wood workshop]]
|location=[[Location::Woodturning Area|woodturning area]]
|access=[[Woodturning Introduction]]
|status=in commissioning (not yet usable)
|manual=
|manual=
|tutors=[[Lukas]]
|status=accessories [https://github.com/comakingspace/do-something/issues/264 need documentation]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|extrabox=yes
|assetid=118
}}
The Tyme Avon is an old, but solidly built lathe that will soon replace the flimsy Güde 1000.
 
 
{{Commissioning
|IssueNumber=
|Naming=
|NamingComment=Tyme Avon (exact model TBD by bed length)
|Picture=
|PictureComment=
|Manual=not available
|ManualComment=print version for sale (expensive) [http://www.lathes.co.uk/tyme/ here]; reportedly not very useful beyond machine specs
|Documentation=
|DocumentationComment=explain (& photograph?) all major accessories and setup options; possible starting point besides manual: http://www.lathes.co.uk/tyme/
|QR=
|QRComment=
|Introduction=
|IntroductionComment=[[Woodturning Introduction]] may need slight changes - TBD
|Security=
|SecurityComment=was fitted with an EU plug and a longer cord by [[Johannes]]; belt runs into the side of its pulleys -> move one pulley by approx. 1 mm
|Test=
|TestComment=
|OwnerValue=
|OwnerValueComment=donated by Joe; value not yet known
|Availability=
|AvailabilityComment=
}}
}}
The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.


=== Specs ===
=== Specs ===
''Apparently sold in different versions<ref>Model ATL300 with 24" (610 mm) between centres, the ATL301 with 36" (915 mm) or the ATL301 that admitted 48" (1220 mm) in bed lengths of 40", 52" and 62" (1016, 1320 and 1575 mm).</ref> - let's measure to see what we got''
We seem to have the Model ATL301 with 36" (915 mm) between centers and a bed length of 52" (1320 mm).


* max. workpiece diameter (above bed): 280 mm (11")
* max. workpiece diameter (above bed): 280 mm (11")
** max. workpiece diameter (swiveled 90°): 495 mm (19.5")
** max. workpiece diameter (swiveled 90°): 495 mm (19.5")
** max. workpiece diameter (swiveled 180°): 610 mm (24")
** max. workpiece diameter (swiveled 180°): 610 mm (24")
* max. workpiece length: ???
* max. workpiece length: 900 mm
* spindle speeds: 470 - 750 - 1150 - 2000 rpm
* spindle speeds: 470 - 750 - 1150 - 2000 rpm
* motor: 550 W (3/4 hp)
* motor: 550 W (3/4 hp)
* spindle thread: ??? M25{{x}}2 mm or Whitworth 3/4" x 16 tpi
* spindle thread: M25{{x}}2 mm; internal No. 2 morse taper (MK2)
* workholding options:
* workholding options:
** headstock: ??? [[faceplate]], [[Four-Jaw Chucks|four-jaw chuck]], ...
** headstock: drive center, [[faceplate]], [[Four-Jaw Chucks|four-jaw chuck]], ...
** tailstock: ??? No. 2 morse taper - accessories: rotating center, ???
** tailstock: No. 2 morse taper (MK2) - accessories: rotating centers, our "usual" drill chucks also fit


<br clear=all>
=== Speed Selection ===
{{#set:  
The lathe can run at various speeds depending on which pulleys are connected by the belt:
|Has caption=Wood Lathe
[[File:Tyme Avon speeds.png|thumb|left|200px|spindle speeds resulting from each belt position]]
|Has German=Drechselbank
 
'''Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!'''
 
New belts are still sold at [https://store.lathes.co.uk/parts/tyme-avon-wood-lathe-drive-belt store.lathes.co.uk]
 
<br clear="all" />
===Accessories===
<gallery>
File:Wood Lathe Tool Rest - Bent.jpg|An alternative tool rest for our Tyme Avon
File:Wood Lathe Barrels.jpg|We have two barrels which can be used with the Tyme Avon - we are usually using the right one, since it spins with the workpiece.
</gallery>
 
'''Click the photos below for more information!'''
{{#ask:
[[Category:Tools]] [[Used With::Tyme Avon]]
| ?Has image
| ?Has caption
| format=gallery
| navigation=auto
| imageproperty=Has image
| captionproperty=Has caption
| sort=Has caption
| redirects=-
| widths = 200
}}
}}
=== Spare Parts ===
Many spare parts can be found via [https://incamachines.com/english/multico-tyme-graduate/tyme-spare-parts.html incamachines.com].
The current driving belt is labeled with "190J6 TBA POLY-V 483J6" and "2088".

Latest revision as of 14:06, 18 July 2024

Tyme Avon

MachineInfoBox

Tyme Avon ATL301

Tyme Avon ATL301.jpg
Type: Wood Lathes
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: Woodturning Area
Access Requirements: Woodturning Introduction
Status: Working
Tutors: Lukas



The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.

Specs

We seem to have the Model ATL301 with 36" (915 mm) between centers and a bed length of 52" (1320 mm).

  • max. workpiece diameter (above bed): 280 mm (11")
    • max. workpiece diameter (swiveled 90°): 495 mm (19.5")
    • max. workpiece diameter (swiveled 180°): 610 mm (24")
  • max. workpiece length: 900 mm
  • spindle speeds: 470 - 750 - 1150 - 2000 rpm
  • motor: 550 W (3/4 hp)
  • spindle thread: M25 × 2 mm; internal No. 2 morse taper (MK2)
  • workholding options:
    • headstock: drive center, faceplate, four-jaw chuck, ...
    • tailstock: No. 2 morse taper (MK2) - accessories: rotating centers, our "usual" drill chucks also fit

Speed Selection

The lathe can run at various speeds depending on which pulleys are connected by the belt:

spindle speeds resulting from each belt position

Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!

New belts are still sold at store.lathes.co.uk


Accessories

  • An alternative tool rest for our Tyme Avon

    An alternative tool rest for our Tyme Avon

  • We have two barrels which can be used with the Tyme Avon - we are usually using the right one, since it spins with the workpiece.

    We have two barrels which can be used with the Tyme Avon - we are usually using the right one, since it spins with the workpiece.

Click the photos below for more information!

Spare Parts

Many spare parts can be found via incamachines.com.

The current driving belt is labeled with "190J6 TBA POLY-V 483J6" and "2088".

Retrieved from "https://wiki.comakingspace.de/index.php?title=Tyme_Avon&oldid=17715"