Festool TS 75 EBQ: Difference between revisions
m (→Festool TS 75 EBQ - Plunge Saw: german) |
|||
Line 3: | Line 3: | ||
|machine name=Festool TS 75 EBQ | |machine name=Festool TS 75 EBQ | ||
|image=Festool_TS 75 EBQ.jpg | |image=Festool_TS 75 EBQ.jpg | ||
|german=Tauchsäge | |||
|synonyms=plunge saw, plunge-cut saw, track saw; DE: Tauchsäge | |synonyms=plunge saw, plunge-cut saw, track saw; DE: Tauchsäge | ||
|type=Handheld Circular Saw | |type=Handheld Circular Saw |
Latest revision as of 21:58, 9 July 2024
Festool TS 75 EBQ - Plunge Saw
MachineInfoBox Festool TS 75 EBQ | |
---|---|
![]() | |
Synonyms: | plunge saw, plunge-cut saw, track saw; DE: Tauchsäge |
Type: | Handheld Circular Saws |
Material: | wood |
Location: | Saw Station |
Access Requirements: | Handheld Circular Saw Introduction |
Status: | Working |
Manual: | manualslib.com (or ZIP from festool.de |
Tutors: | Lukas NitramLegov Pakue Johannes Luzian Keno Utis |
The Festool TS 75 EBQ is a plunge saw, that allows, in addition to normal circular saw functions, to be pushed downwards into the workpiece. The maximal depth is 75 mm and can be adjusted in 1 mm increments.
Make sure to remove the riving knife (Spaltkeil) before a plunge cut, it will get in the way!
Guide Rail
The saw can be used with a Festool guide rail for ease of use. Currently we have a single 1400 mm rail, but in the future multiple ones can be joined together to cut any length wished.
To avoid kickback during plunging, an endstop can be attached to the rail. When not in use it is attached to the backside of the saw.
Available Equipment
Besides the saw itself, we currently have:
- cable
- 2x 1400 mm rail
- systainer (aka. fancy Festool box)
- manual
- splinter guard (green thingy with nut and black thing with screw)
- SYS3 M 137 FS/2 Set
- FS-WA angle stop
- 2 clamps
- rail extension
- cable/vacuum hose guard
FS-WA angle stop
Used to get an adjustable ±60° angle stop on a guide rail. Handy repeated cuts on a board.