Festool TS 75 EBQ: Difference between revisions

Latest revision as of 20:58, 9 July 2024

Festool TS 75 EBQ - Plunge Saw

MachineInfoBox Festool TS 75 EBQ

Synonyms:	plunge saw, plunge-cut saw, track saw; DE: Tauchsäge
Type:	Handheld Circular Saws
Material:	wood
Location:	Saw Station
Access Requirements:	Handheld Circular Saw Introduction
Status:	Working
Manual:	manualslib.com (or ZIP from festool.de
Tutors:	Lukas NitramLegov Pakue Johannes Luzian Keno Utis

The Festool TS 75 EBQ is a plunge saw, that allows, in addition to normal circular saw functions, to be pushed downwards into the workpiece. The maximal depth is 75 mm and can be adjusted in 1 mm increments.

Make sure to remove the riving knife (Spaltkeil) before a plunge cut, it will get in the way!

Guide Rail

Kickback stop

The saw can be used with a Festool guide rail for ease of use. Currently we have a single 1400 mm rail, but in the future multiple ones can be joined together to cut any length wished.

To avoid kickback during plunging, an endstop can be attached to the rail. When not in use it is attached to the backside of the saw.

Available Equipment

Besides the saw itself, we currently have:

cable
2x 1400 mm rail
systainer (aka. fancy Festool box)
manual
splinter guard (green thingy with nut and black thing with screw)
SYS3 M 137 FS/2 Set
- FS-WA angle stop
- 2 clamps
- rail extension
- cable/vacuum hose guard

FS-WA angle stop

Used to get an adjustable ±60° angle stop on a guide rail. Handy repeated cuts on a board.

FS-WA angle stop]]
Parallel jaws across the upper slot. Guide insert into the lower slot.]]
Clamp onto the inside of the upper slot.]]
Edge extension for thicker boards and or large chamfers/fillets.]]
Insert the two edge extensions into the slot closer to the board edge and screw it down.
Final placement.

FS/2-AW deflector

Hose/cable guide

FSV/2 connecting pieces

Don't over tighten the screws!

@@ Line 1: / Line 1: @@
-#redirect[[Handheld Circular Saws]]
+== Festool TS 75 EBQ - Plunge Saw ==
+{{MachineInfoBox
+|machine name=Festool TS 75 EBQ
+|image=Festool_TS 75 EBQ.jpg
+|german=Tauchsäge
+|synonyms=plunge saw, plunge-cut saw, track saw; DE: Tauchsäge
+|type=Handheld Circular Saw
+|status=re-adjusted 2022-7-22 - hoping that fixed some issues
+|location=[[Location::Saw Station|Saw Station]]
+|material=[[wood]]
+|manual=[https://www.manualslib.com/manual/1311650/Festool-Ts-75-Ebq.html manualslib.com]<br>(or [https://www.festool.de/produkte/saegen/tauchsaegen/561184---ts-75-ebq#Downloads ZIP from festool.de]
+|assetid=20}}
+The Festool TS 75 EBQ is a '''plunge saw''', that allows, in addition to normal circular saw functions, to be pushed downwards into the workpiece. The maximal depth is [[MaxSawCutDepthMillimeters::75]] mm and can be adjusted in 1 mm increments.
+Make sure to remove the riving knife ''(Spaltkeil)'' before a plunge cut, it will get in the way!
+=== Guide Rail ===
+[[File:Festool_TS_75_EBQ_kickback_stop.jpg | thumb | 180px |left | Kickback stop]]
+The saw can be used with a Festool guide rail for ease of use. Currently we have a single 1400 mm rail, but in the future multiple ones can be joined together to cut any length wished.
+To avoid kickback during plunging, an endstop can be attached to the rail. When not in use it is attached to the backside of the saw.
+<br clear=left>
+=== Available Equipment ===
+Besides the saw itself, we currently have:
+* cable
+* 2x 1400 mm rail
+* systainer (aka. fancy Festool box)
+* manual
+* splinter guard (green thingy with nut and black thing with screw)
+*SYS3 M 137 FS/2 Set
+**FS-WA angle stop
+**2 clamps
+**rail extension
+**cable/vacuum hose guard
+==== FS-WA angle stop ====
+Used to get an adjustable ±60° angle stop on a guide rail. Handy repeated cuts on a board.
+<gallery>
+File:FS-WA angle stop.jpg|FS-WA angle stop]]
+File:FS-WA angle stop install 1.jpg|Parallel jaws across the upper slot. Guide insert into the lower slot.]]
+File:FS-WA angle stop install 2.jpg|Clamp onto the inside of the upper slot.]]
+File:FS-WA angle stop edge extension.jpg|Edge extension for thicker boards and or large chamfers/fillets.]]
+File:FS-WA angle stop edge extension placement 1.jpg|Insert the two edge extensions into the slot closer to the board edge and screw it down.
+File:FS-WA angle stop edge extension placement 2.jpg|Final placement.
+</gallery>
+==== FS/2-AW deflector ====
+[[File:FS-2-AW deflector.jpg|none|thumb|Hose/cable guide]]
+==== FSV/2 connecting pieces ====
+[[File:FSV-2 connecting pieces 1.jpg|none|thumb]]
+[[File:FSV-2 connecting pieces 2.jpg|none|thumb|Don't over tighten the screws!]]