Bandsaw Sled: Difference between revisions
From CoMakingSpace Wiki
(missing picture added in source...) |
m (category bandsaw jigs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=Round Stock Sled | |tool name=Round Stock Sled | ||
|image=bandsaw sled.JPG | |german=Bandsägen-Zuführschlitten|image=bandsaw sled.JPG | ||
|synonyms=DE: Bandsägen-Zuführschlitten | |synonyms=DE: Bandsägen-Zuführschlitten | ||
|type=[[jig]] | |type=[[Bandsaw Jig|bandsaw jig]] | ||
|status= | |status= | ||
|material=round or thin pieces you want to crosscut;<br>any material appropriate for the selected [[sawband]] | |material=round or thin pieces you want to crosscut;<br>any material appropriate for the selected [[sawband]] | ||
| Line 9: | Line 9: | ||
|location=[[Location::Wood Workshop|wood workshop]] (''near'' [[bandsaw]]) | |location=[[Location::Wood Workshop|wood workshop]] (''near'' [[bandsaw]]) | ||
|access=read this page | |access=read this page | ||
|tutors=[[ | |tutors=[[User:Lukas|Lukas]] | ||
|manual= | |manual= | ||
|donation= | |donation= | ||
| Line 20: | Line 20: | ||
[[File:bandsaw sled without clamps.JPG.jpg|thumb|left|after some successful cuts with a given material, you may be confident to use the sled without clamps - but always try it the safer way first!]] | [[File:bandsaw sled without clamps.JPG.jpg|thumb|left|after some successful cuts with a given material, you may be confident to use the sled without clamps - but always try it the safer way first!]] | ||
[[File:bandsaw sled guides.JPG|thumb|left|some [[3DP|3D printed]] T-slot guides were screwed into the underside of the sled at just the right places for nice tracking on the machine table]] | |||
[[Category:Jigs]] | |||
[[Category:Bandsaw Jigs]] | |||
[[Category:Woodworking]] | [[Category:Woodworking]] | ||
Latest revision as of 22:33, 11 May 2024
| ToolInfoBox Round Stock Sled | |
|---|---|
| |
| Synonyms: | DE: Bandsägen-Zuführschlitten |
| Type: | bandsaw jig |
| Material: | round or thin pieces you want to crosscut; any material appropriate for the selected sawband |
| Used with: | Metabo BS 1638 W |
| Location: | wood workshop (near bandsaw) |
| Access Requirements: | read this page |
| Tutors: | Lukas |
| Similar (More or Less): | bandsaw fence |
Never attempt to cut round workpieces without a jig, they could rotate and bind with the blade!
Lukas built this jig in order to crosscut 100 mm acrylic pipe for Project:Fish Cages, but it should also work for less precisely round pieces (logs, branches) or smaller diameter pipes/tubes.
some 3D printed T-slot guides were screwed into the underside of the sled at just the right places for nice tracking on the machine table
