Compressor: Difference between revisions

Latest revision as of 07:49, 3 February 2024

You can find our air compressor in the metal workshop.

Herkules Pro-Line Flüsterkompressor Siltek 24

MachineInfoBox Herkules Pro-Line Flüsterkompressor Siltek 24

Synonyms:	DE: Kompressor
Type:	Compressor
Material:	air
Used with:	list of accessories below; blast cabinet
Location:	Cold Metal Area
Access Requirements:	Compressor Introduction
Status:	Working
Manual:	bauhaus.info
Tutors:	Lukas NitramLegov Pakue Luzian

We got a silent air compressor for use within our workshop with the following specs:

Noise: 59 db
Capacity: 24 liters
Max pressure: 8 bar
Motor Power: 1kW

Pressure Control

This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!

For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.

Maintenance

Compressors collect ambient humidity over time that condenses on the inside. You should drain excess water from the tank before and after long runs - release the air from the tank first!

Accessories

So far, we have:

a simple blow gun
tire filler (Reifenfüller) with Michelin fitting ("car valve")
- CAUTION: the reading seems to be 0.3 bar too low, i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
20 m hose drum

blow gun
tire filler
hose drum

@@ Line 1: / Line 1: @@
-{{ToolInfoBox
-|tool name=Einhell Air Tech Euro 2200-1
-|image=Einhell Air Tech Euro 2200-1.JPG
-|synonyms=DE: Kompressor
-|type=[[pneumatics]] tool
-|material=[[Air]]
-|used with=[[#Accessories|list of accessories below]];<br>[[Blast Cabinet|blast cabinet]]
-|location=(soon) [[Metal Workshop|metal workshop]]
-|access=after a [[Compressor Introduction|personal introduction]]
-|tutors={{£}}
-|manual=[http://www2.produktinfo.conrad.com/datenblaetter/825000-849999/825882-an-01-ml-KOMPRESSOR_EURO_8_24_de_en_fr_nl_cs_sl.pdf conrad.com]
-|donation=
-|similar=
-}}
 You can find our air compressor in the [[Metal Workshop|metal workshop]].
-It is powered by a 1.5 kW (2 horsepower) motor and can compress 210 liters of air per minute to a pressure of 8 bar.
+{{MachineInclusion}}
-'''With no accessory connected, the coupling on the right ("full pressure") was found to leak on 2018-3-25 - if this problem persists we should replace the part!'''
-== Pressure Control ==
-[[File:compressor outlets.JPG|thumb|left|200 px|air outlets - full pressure on the right, decreased on the left]]
-There are two outlets on the compressor: the right one delivers whatever amount of pressure is available in the tank (up to 8 bar) and the left one is adjustable by the pressure reduction knob in the middle.
-'''Turning the knob clockwise will increase pressure, counterclockwise turning increases it!'''
-For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.
-<br clear=left>
 == Maintenance ==
-[[File:compressor oil level.JPG|thumb|left|200px|oil level indicator]]
+Compressors collect ambient humidity over time that condenses on the inside.
-The oil level should always be kept between the red dot and the top of the level indicator.
+You should drain excess water from the tank before and after long runs - release the air from the tank first!
-You should drain excess water through the valve at the bottom of the tank before and after long runs - release the air from the tank first!
 <br clear=left>
@@ Line 41: / Line 13: @@
 * a simple blow gun
 * tire filler (''Reifenfüller'') with Michelin fitting ("car valve")
+** '''CAUTION: the reading seems to be 0.3 bar too low''', i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
 * 20 m hose drum
@@ Line 50: / Line 23: @@
+[[Category:Cycling]]
 [[Category:Pneumatics]]