Compressor: Difference between revisions
(linked manual, added basic specs) |
(→Accessories: tire filler: off by 0.3 bar) |
||
| (16 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
You can find our air compressor in the [[Metal Workshop|metal workshop]]. | You can find our air compressor in the [[Metal Workshop|metal workshop]]. | ||
{{MachineInclusion}} | |||
== | == Maintenance == | ||
Compressors collect ambient humidity over time that condenses on the inside. | |||
You should drain excess water from the tank before and after long runs - release the air from the tank first! | |||
<br clear=left> | |||
== Accessories == | |||
So far, we have: | |||
* a simple blow gun | |||
* tire filler (''Reifenfüller'') with Michelin fitting ("car valve") | |||
** '''CAUTION: the reading seems to be 0.3 bar too low''', i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor | |||
* 20 m hose drum | |||
<gallery mode=packed-hover heights=200> | |||
File:blow gun.JPG|blow gun | |||
File:tire filler.JPG|tire filler | |||
File:hose drum.JPG|hose drum | |||
</gallery> | |||
[[Category:Cycling]] | |||
[[Category:Pneumatics]] | [[Category:Pneumatics]] | ||
Latest revision as of 07:49, 3 February 2024
You can find our air compressor in the metal workshop.
Herkules Pro-Line Flüsterkompressor Siltek 24
| MachineInfoBox Herkules Pro-Line Flüsterkompressor Siltek 24 | |
|---|---|
| |
| Synonyms: | DE: Kompressor |
| Type: | Compressor |
| Material: | air |
| Used with: | list of accessories below; blast cabinet |
| Location: | Cold Metal Area |
| Access Requirements: | Compressor Introduction |
| Status: | Working |
| Manual: | bauhaus.info |
| Tutors: | Lukas NitramLegov Pakue Luzian |
We got a silent air compressor for use within our workshop with the following specs:
- Noise: 59 db
- Capacity: 24 liters
- Max pressure: 8 bar
- Motor Power: 1kW
Pressure Control
This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!
For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.
Maintenance
Compressors collect ambient humidity over time that condenses on the inside. You should drain excess water from the tank before and after long runs - release the air from the tank first!
Accessories
So far, we have:
- a simple blow gun
- tire filler (Reifenfüller) with Michelin fitting ("car valve")
- CAUTION: the reading seems to be 0.3 bar too low, i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
- 20 m hose drum
blow gun
tire filler
hose drum
