Compressor: Difference between revisions

From CoMakingSpace Wiki

m (Outsourced Machines)
Tags: Replaced Visual edit
(→‎Accessories: tire filler: off by 0.3 bar)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
You can find our air compressor in the [[Metal Workshop|metal workshop]].
{{MachineInclusion}}
== Maintenance ==
Compressors collect ambient humidity over time that condenses on the inside.
You should drain excess water from the tank before and after long runs - release the air from the tank first!
<br clear=left>
== Accessories ==
So far, we have:
* a simple blow gun
* tire filler (''Reifenfüller'') with Michelin fitting ("car valve")
** '''CAUTION: the reading seems to be 0.3 bar too low''', i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
* 20 m hose drum
<gallery mode=packed-hover heights=200>
File:blow gun.JPG|blow gun
File:tire filler.JPG|tire filler
File:hose drum.JPG|hose drum
</gallery>


[[Category:Cycling]]
[[Category:Cycling]]
[[Category:Pneumatics]]
[[Category:Pneumatics]]
{{MachineInclusion}}

Latest revision as of 07:49, 3 February 2024

You can find our air compressor in the metal workshop.

Herkules Pro-Line Flüsterkompressor Siltek 24

MachineInfoBox

Herkules Pro-Line Flüsterkompressor Siltek 24

Herkules Pro-Line Flüsterkompressor Siltek 24.jpeg
Synonyms: DE: Kompressor
Type: Compressor
Material: air
Used with: list of accessories below;
blast cabinet
Location: Cold Metal Area
Access Requirements: Compressor Introduction
Status: Working
Manual: bauhaus.info
Tutors: Lukas
NitramLegov
Pakue
Luzian



We got a silent air compressor for use within our workshop with the following specs:

  • Noise: 59 db
  • Capacity: 24 liters
  • Max pressure: 8 bar
  • Motor Power: 1kW

Pressure Control

This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!

For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.



Maintenance

Compressors collect ambient humidity over time that condenses on the inside. You should drain excess water from the tank before and after long runs - release the air from the tank first!


Accessories

So far, we have:

  • a simple blow gun
  • tire filler (Reifenfüller) with Michelin fitting ("car valve")
    • CAUTION: the reading seems to be 0.3 bar too low, i.e. if you fill a tire according to the dial you will overfill it by 0.3 bar (comparison with digital gas station compressor
  • 20 m hose drum