Festo RO 2 E: Difference between revisions
From CoMakingSpace Wiki
(outsourced machine specifics from "Eccentric Sanders", updated location) |
NitramLegov (talk | contribs) m (→Festo RO 2 E: Add AssetID) |
||
| Line 8: | Line 8: | ||
|type=Eccentric Sander | |type=Eccentric Sander | ||
|manual=[https://www.bedienungsanleitu.ng/festo/ro-2-e/anleitung bedienungsanleitu.ng] | |manual=[https://www.bedienungsanleitu.ng/festo/ro-2-e/anleitung bedienungsanleitu.ng] | ||
|used with=150 mm [[Sanding Discs|sanding discs]] with 8 holes | |Asset ID=61|used with=150 mm [[Sanding Discs|sanding discs]] with 8 holes | ||
}} | }} | ||
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (''keine Anlaufsicherung'')! | The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (''keine Anlaufsicherung'')! | ||
Revision as of 00:24, 5 November 2022
Festo RO 2 E
| MachineInfoBox Festo RO 2 E | |
|---|---|
| |
| Used with: | 150 mm sanding discs with 8 holes |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | bedienungsanleitu.ng |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!
When the foam part of our usual sanding part crumbled away, Keno and Lukas glued its velcro (Klett) sheet to a healthier pad with bad velcro ("Polymer-Klebstoff", XPS scrap piece for even clamping pressure without breaking the disc).
