Hole Saws: Difference between revisions
NitramLegov (talk | contribs) (To my knowledge, the simple set is gone for good) |
NitramLegov (talk | contribs) m (remove tutor property) |
||
| Line 7: | Line 7: | ||
|location=[[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]] | |location=[[Location::Drilling Table|drilling table]]<br>([[Location::Wood Workshop|wood workshop]] | ||
|material=depends on type ([[wood]], [[concrete]] or even [[metals]]) | |material=depends on type ([[wood]], [[concrete]] or even [[metals]]) | ||
|tutors=[[ | |tutors=[[User:Lukas|Lukas]] | ||
|used with=[[drills]] | |used with=[[drills]] | ||
}} | }} | ||
Revision as of 16:49, 4 March 2022
| ToolInfoBox Hole Saws | |
|---|---|
| |
| Synonyms: | bell saws, hole cutter bits; DE: Lochsägen, Kreisbohrer, Dosenbohrer, Bohrkronen, Topfsägen, Lochkranzbohrer |
| Type: | bits/saws |
| Material: | depends on type (wood, concrete or even metals) |
| Used with: | drills |
| Location: | drilling table (wood workshop |
| Access Requirements: | upon reading |
| Tutors: | Lukas |
Hole saws are drill bits that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time.
If you need guidance without the pilot drill bit (e.g. when cutting around a hole that is already larger than the pilot drill bit, or if you need discs without a hole), try clamping a template cut with the same hole saw on top of your workpiece. [1]
There is significant kickback when (mis-)using this tool, take the time do it right!
Proper Use
Put only a single saw blade into the holder when you want to use it!
Use a drill at relatively high speed but little pressure.
| ⌀ | max rpm |
|---|---|
| 26 - 39 mm | 1200 |
| 45 - 58 mm | 1000 |
| 64 mm | 800 |
No hammering drill can be used to saw holes.
Besides keeping the saws intact, please take personal safety precautions and wear safety goggles!
Available Sizes
Bosch "Progressor Electrician" set: 19, 25, 38, 44, 68, 83 mm in diameter
- can be expanded with further saws that are compatible with the "Bosch Power Change Plus" system!
Past Issues
2018-3: the screw broke out of the aluminum blade holder - fixed by drilling/tapping a new hole opposite of it
