Bambu Lab P1S (2): Difference between revisions
From CoMakingSpace Wiki
(→Bambu Lab P1S (2): image) |
m (removed code formatting) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 13: | Line 13: | ||
|manual=[https://wiki.bambulab.com/en/p1/manual wiki.bambulab.com] | |manual=[https://wiki.bambulab.com/en/p1/manual wiki.bambulab.com] | ||
|assetid=163 | |assetid=163 | ||
}}In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [https://wiki.bambulab.com/en/p1/manual manual] and use the latest version of Bambu Studio on the slicer PC. | }} | ||
In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [https://wiki.bambulab.com/en/p1/manual manual] and use the latest version of Bambu Studio on the slicer PC. | |||
The build volume of this model is 256{{x}}256{{x}}256 mm. <br clear=all> | The build volume of this model is 256{{x}}256{{x}}256 mm. <br clear="all"> | ||
Latest revision as of 13:57, 2 July 2024
Bambu Lab P1S (2)
| MachineInfoBox Bambu Lab P1S (2) | |
|---|---|
| |
| Type: | 3D Printers |
| Material: | plastic filament |
| Location: | 3D Printing Area |
| Access Requirements: | 3D Printer Introduction |
| Status: | Working |
| Software: | Bambu Slicer |
| Manual: | wiki.bambulab.com |
| Tutors: | Lukas NitramLegov Pakue Mitja Lmnl99 Johannes Ciaran Luzian Leo Narquadah Kalunho Björn |
In addition to receiving a personal introduction from one of the tutors, make sure that you have read the manual and use the latest version of Bambu Studio on the slicer PC.
The build volume of this model is 256 × 256 × 256 mm.
