Scheppach DP 16 SL: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m (Formatting) |
NitramLegov (talk | contribs) m (→Scheppach DP 16 SL: Add assetid) |
||
| Line 7: | Line 7: | ||
|location=[[Location::Drilling Table|drilling table]] | |location=[[Location::Drilling Table|drilling table]] | ||
|manual=[https://media.bahag.com/assets/26/66/2666194_25021243.pdf bahag.com] | |manual=[https://media.bahag.com/assets/26/66/2666194_25021243.pdf bahag.com] | ||
}} | |assetid=58}} | ||
[[User:Blacksheep|Blacksheep]] kindly donated a Scheppach DP 16 SL drill press in August 2019.<br/> | [[User:Blacksheep|Blacksheep]] kindly donated a Scheppach DP 16 SL drill press in August 2019.<br/> | ||
From a technical point of view, it offers the following: | From a technical point of view, it offers the following: | ||
Revision as of 14:53, 5 November 2022
Scheppach DP 16 SL
| MachineInfoBox Scheppach DP 16 SL | |
|---|---|
| |
| Type: | Drill Press |
| Location: | drilling table |
| Access Requirements: | Drill Introduction |
| Status: | [[Has InfoBox Status::working except slowest speed]] |
| Manual: | bahag.com |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Jakob |
Blacksheep kindly donated a Scheppach DP 16 SL drill press in August 2019.
From a technical point of view, it offers the following:
- Drill mount: 1 - 16 mm (neues Futter)
- Speed:
510800 - 2430 rpm
Drill Speeds
When changing the belt position, unlock the the motor hinge with the screw on the right side. Then move the belt on the pulley that reduces the diameter and afterwards change the belt position on the second pulley (similar to changing the chain on a bike). When the belt is in its final position, it should be level (waagerecht) and have enough slack so the motor can be pushed back and re-locked with the screw.
The slowest speed is currently not available due to a broken pulley!
Depth Stop
The original depth stop collar broke relatively soon, so Patrick designed a 3D printable replacement part.
