Oscillating Tool
| ToolInfoBox Fein MSxe 636 II | |
|---|---|
| |
| Synonyms: | oscillator, "multitool"; DE: Oszillierer, Oszillationssäge, Vibrationssäge, MultiMaster, "Zappler", Oszillationswerkzeug |
| Type: | power tool |
| Material: | wood, metal, plastics (depending on inserted accessory) |
| Location: | storage |
| Access Requirements: | upon personal introduction |
| Manual: | manuals lib |
| Similar (More or Less): | saws, sanders, rotary tool |
An oscillating tool moves its head back and forth at high speeds by a tiny amount, thereby eliminating much of the kickback you might experience with regular electric saws or sanders. It is therefore especially nice for delicate workpieces and hard-to-reach places.
Accessories
A list of accessories can be found at the Fein shop. An oscillating tool is a very flexible tool which can be used for a broad range of tasks and with a broad range of materials. In order to achieve this flexibility, a variety of attachments exist, which can quickly be attached to the tool. Depending on the attachment and the use-case, different oscillating frequencies are available. According to the manual, they should be selected following this logic: High oscillation frequency:Sanding, sawing, rasping and polishingstone and metal. Low oscillation frequency:Polishing varnishes.
Please note that we do NOT have everything available, you may want to bring the attachment needed for your project:
Sanding Pads
| ToolInfoBox Sanding Pads | |
|---|---|
| |
| Synonyms: | DE: Schleifplatten |
| Type: | attachment for the oscillating tool |
| Location: | oscillating tool's box |
We have several sanding pads that hold compatible triangular sandpaper sheets with a hook-and-loop (Klett) system. Please bring more sanding sheets when you consume some!
Saw Blades
Saw blades for the oscillating tool come in two basic variants - fixed or exchangeable.
Exchangeable saw attachments are attachments to the oscillating tool in which the saw blade is replaceable. In case the saw breaks or becomes blunt, the saw blade can easily be replaced and therefore not the whole attachment has to be thrown away.
Fixed saw attachments are attachments to the oscillating tool in which the saw blade is fix and cannot be replaced. In case the saw breaks or becomes blunt, the whole attachment has to be replaced.
Hard Metal Saws
| ToolInfoBox Hard Metal Saws | |
|---|---|
| |
| Type: | attachment for the oscillating tool |
Hard metal saws are being used when cutting joints between tiles (German:Fugen). They are useful for removing defective tile ground, but can also be used for cutting into plaster or porous concrete (according to Fein)
Scraper tools
| ToolInfoBox Scraper attachment | |
|---|---|
| |
| Type: | Attachment for the oscillating tool |
Screpare blades can be used "For removal of stubborn paint, adhesive residue, carpet, tile adhesive, and underseal." (Fein shop)
