Micrometer Screw

From CoMakingSpace Wiki

Revision as of 00:56, 22 February 2022 by Lukas (talk | contribs) (German name)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Micrometer Screw

Synonyms: micrometer screw gauge;
DE: Mikrometer, Messschraube, Mikrometerschraube,
Bügelschraube, Bügelmessschraube
Type: measuring tool
Used with: metal lathes
Location: metal workshop
Access Requirements: read this page
Tutors: Luzian
Similar (More or Less): calipers

We have an (outside) micrometer in the metal workshop.

Capacity: 25 mm

Should I Use It?

This high precision measuring instrument is very sensitive and isn't very versatile or practical compared to a caliper. The upside to this tool is its precision, up to 1/1000 of a millimeter depending on the specific model. The downsides are the small measuring range (25mm max), the high cost and that it takes a lot of time to screw it open - so depending on what you're measuring it usually doesn't make sense to use this tool. Mostly it is used to measure whether the thickness of something is consistent or to take the exact diameter of a turned piece to make adjustments.

How to Use It

  1. Place the object you want to measure between the anvil and spindle
  2. Turn the milled knob until the spindle and anvil lightly touch the object. Do not over tighten the spindle.

In order not to damage the spindle and/or get distorted readings, do not turn on the spindle directly but rather use the milled knob. It has a constant amount of slack and will therefore not allow you to over tighten it. Newer models have a ratchet to allow for even more precision.

how to get the reading

Further Reading