Hole Saws: Difference between revisions
(BROKEN) |
(temporarily stored in the office) |
||
| Line 5: | Line 5: | ||
|type=bits/[[:Category:Saws|saws]] | |type=bits/[[:Category:Saws|saws]] | ||
|access=upon reading | |access=upon reading | ||
|location=[[Drilling Table|drilling table]] | |location=<strike>[[Drilling Table|drilling table]]</strike><br>''[[office]] (under repair)'' | ||
|material=depends on type ([[wood]], [[concrete]] or even [[metals]]) | |material=depends on type ([[wood]], [[concrete]] or even [[metals]]) | ||
|tutors=[[User:Lukas|Lukas]] | |tutors=[[User:Lukas|Lukas]] | ||
Revision as of 06:23, 15 March 2018
| ToolInfoBox Hole Saws | |
|---|---|
| |
| Synonyms: | hole cutter bits; DE: Lochsägen, Kreisbohrer, Dosenbohrer, Bohrkronen, Topfsägen, Lochkranzbohrer |
| Type: | bits/saws |
| Material: | depends on type (wood, concrete or even metals) |
| Used with: | drills |
| Location: | office (under repair) |
| Access Requirements: | upon reading |
| Tutors: | Lukas |
This tool is currently in need of repair - the screw broke out of the aluminum blade holder!
Hole saws are drill bits that consist of a saw blade holder and a central pilot drill bit which determines the position of the hole. Often, interchangeable saw blades are locked on the holder one at a time.
We currently have a set of wood hole saws that can cut 44 mm deep and 26, 32, 39, 45, 51, 58 or 64 mm in diameter.
There is significant kickback when (mis-)using this tool, take the time do it right!
Proper Use
Put only a single saw blade into the holder when you want to use it!
Use a drill at relatively high speed but little pressure.
| ⌀ | max rpm |
|---|---|
| 26 - 39 mm | 1200 |
| 45 - 58 mm | 1000 |
| 64 mm | 800 |
No hammering drill can be used to saw holes.
Besides keeping the saws intact, please take personal safety precautions and wear safety goggles!
