HBM AS188
HBM AS188
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Was bought as "Airbrush Kompressor Model ArtisticLife 188 (al188)" - tag on the machine itself says "AS 188" | Done |
| Take a picture | - | pending |
| Find the manual as PDF | For googling, please see the naming comment | pending |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | Airbrush Introduction | Started |
| Security Check | to be done or witnessed by a manager | done |
| Test | to be done or witnessed by a manager | ??? |
| tool's name, owner and approx. value | Provided to Patrick, waiting for internal documentation | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
| MachineInfoBox HBM AS188 | |
|---|---|
| |
| Material: | Airbrush Paint |
| Access Requirements: | Airbrush Introduction |
| Tutors: | Björn |
| Similar (More or Less): | Compressor |
This compressor is dedicated to be used with airbrushing equipment and must not be used otherwise!
Manual
We're still looking for the PDF manual for this exact model. The manual for a similar model (AS-186) can be found here.
Specifications
- boiler capacity: 3 liters
- working pressure: 0.2 - 4 bar
- engine power 150 watts / 1/6 HP.
- number of cilinders: 1
- voltage: 220 - 240 volts
- noise level: approx. 50 dB (A)
- net air yield: 23 L/minute
- weight: 8.6 kg
Both connections have their own pressure regulator and pressure gauge.
Built-in Moisture separator in the tank.
Terminal and overpressure protection above 6 bar.
Oil-free compressor.
How to Connect an Airbrush to the Compressor
To connect the compressor hose to an airbrush, please use the adaptor piece. The compressor will keep its pressure even if no airbrush is connected.
