File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 15:02, 2 December 2020 | 16068390675358962047496940485048.jpg (file) |  |
1.63 MB | Karel (talk | contribs) | 1 | |
| 14:57, 2 December 2020 | 20201201 091516.jpg (file) |  |
2.45 MB | Karel (talk | contribs) | 1 | |
| 14:40, 2 December 2020 | 20201201 091706.jpg (file) |  |
1.91 MB | Karel (talk | contribs) | 1 | |
| 14:23, 2 December 2020 | Bed leg 2.jpg (file) |  |
1.87 MB | Karel (talk | contribs) | 1 | |
| 13:25, 2 December 2020 | Karel - bed leg.jpg (file) |  |
347 KB | Lukas (talk | contribs) | When the legs on your bed break, just make super solid, new ones! Photo by Karel Category:Repair | 1 |
| 03:37, 29 October 2020 | Abrichte falsch bekleidet.JPG (file) |  |
223 KB | Lukas (talk | contribs) | At the Jointer-Planer you MUST NOT (red) wear jewellery, including watches and rings, or loose long clothing. | 1 |
| 02:59, 23 October 2020 | Planer - angled infeed.JPG (file) |  |
435 KB | Lukas (talk | contribs) | Feeding boards through a planer/bottom of a jointer-planer at a slight angle may help to avoid "snipe" ''(Hobelschläge)'' | 1 |
| 02:22, 23 October 2020 | Jointer - fingers together.JPG (file) |  |
470 KB | Lukas (talk | contribs) | When moving a workpiece over the jointer, your fingers should always remain close together and far from the blades. | 1 |
| 02:10, 23 October 2020 | Abrichte - Hilfsanschlag.svg (file) |  |
3.79 MB | Lukas (talk | contribs) | Benutzung des Hilfsanschlags beim Abrichten schmaler Werkstücke ''Use of the auxiliary fence when jointing narrow workpieces'' ---- created with Inkscape | 1 |
| 21:57, 22 October 2020 | Planer cut order diagram.jpg (file) |  |
351 KB | Pakue (talk | contribs) | Removed wood grain to avoid confusion and added legs to the table saw to make it easier to identify. | 3 |
| 14:19, 12 September 2020 | Planer-Thicknesser InUse.jpeg (file) |  |
1.89 MB | Pakue (talk | contribs) | Planer-Thicknesser | 1 |
| 11:52, 12 September 2020 | Wood ring direction.png (file) |  |
14 KB | Lars (talk | contribs) | Taken from https://informationsdienst-holz.de/fileadmin/Publikationen/2_Holzbau_Handbuch/R04_T01_F01_Holz_als_konstruktiver_Baustoff.pdf (page 26) | 1 |
| 11:38, 10 September 2020 | Kickback.png (file) |  |
3 KB | Lars (talk | contribs) | 1 | |
| 11:13, 10 September 2020 | Not alone.svg (file) |  |
5 KB | Lars (talk | contribs) | Do not use alone! | 1 |
| 18:27, 20 August 2020 | Chainsaw mill - first board.jpg (file) |  |
270 KB | Lukas (talk | contribs) | The first full board cut with {{£}}'s chainsaw. Project:Chainsaw Mill | 1 |
| 20:56, 14 August 2020 | LS6090 Control Movement Possible.JPG (file) |  |
1.22 MB | NitramLegov (talk | contribs) | 1 | |
| 20:44, 14 August 2020 | LS6090 Control 1.JPG (file) |  |
5.59 MB | NitramLegov (talk | contribs) | 1 | |
| 16:32, 1 August 2020 | Makita 3612BR in router table.png (file) |  |
1.16 MB | Lukas (talk | contribs) | the machine control elements of the Makita 3612BR you'll need for operation in the router table | 1 |
| 16:05, 1 August 2020 | Router table - starting pin.png (file) |  |
711 KB | Lukas (talk | contribs) | When working fenceless with a guide-bearing bit on the router table, a starting pin needs to be used for a safe first contact with your workpiece. It helps you make sure your workpiece stays in front of the router bit! | 1 |
| 09:51, 1 August 2020 | Makita 3612BR - collet sleeve.JPG (file) |  |
1.39 MB | Lukas (talk | contribs) | a collet sleeve (silver) reduces the Makita 3612BR collet diameter from 12 to 8 mm for common hobbyist router bits | 1 |
| 16:51, 28 July 2020 | Makita 3612BR.JPG (file) |  |
604 KB | Lukas (talk | contribs) | type plate on our Makita 3612BR router | 1 |
| 00:08, 28 July 2020 | Lapping stone.JPG (file) |  |
324 KB | Lukas (talk | contribs) | a self-made lapping stone on a table | 1 |
| 22:03, 14 July 2020 | AGB.pdf (file) |  |
88 KB | NitramLegov (talk | contribs) | 4 | |
| 21:03, 6 July 2020 | Belt Sander Direction.png (file) |  |
1.2 MB | Pakue (talk | contribs) | Illustration of the turn direction of the belt sander. | 1 |
| 18:27, 26 June 2020 | Beltsander AEG HBSE100.jpg (file) |  |
2.53 MB | Pakue (talk | contribs) | Belt Sander | 1 |
| 19:53, 21 June 2020 | ShipsWheel99 TheCabin.jpg (file) |  |
231 KB | NitramLegov (talk | contribs) | 1 | |
| 19:44, 21 June 2020 | ShipsWheel06 LaserTest.JPG (file) |  |
4.93 MB | NitramLegov (talk | contribs) | 1 | |
| 19:44, 21 June 2020 | ShipsWheel04 Routing02.JPG (file) |  |
5.35 MB | NitramLegov (talk | contribs) | 1 | |
| 19:44, 21 June 2020 | ShipsWheel03 Routing01.JPG (file) |  |
5.65 MB | NitramLegov (talk | contribs) | 1 | |
| 19:44, 21 June 2020 | ShipsWheel02 AfterCNC.JPG (file) |  |
4.92 MB | NitramLegov (talk | contribs) | 1 | |
| 19:44, 21 June 2020 | ShipsWheel01 Fusion Design.jpg (file) |  |
388 KB | NitramLegov (talk | contribs) | 1 | |
| 19:39, 21 June 2020 | ShipsWheel05 AfterRouting.JPG (file) |  |
5.67 MB | NitramLegov (talk | contribs) | 1 | |
| 14:23, 20 June 2020 | CMS wallpaper4kwm.png (file) |  |
12.36 MB | Luzian (talk | contribs) | CMS logo neon sign render with blender | 1 |
| 15:54, 14 June 2020 | LaserCut53 ZoomToTable Result.jpg (file) |  |
476 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 ZoomToTable.jpg (file) |  |
24 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 ZoomToAllObjects Result.jpg (file) |  |
477 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 ZoomToAllObjects.jpg (file) |  |
23 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 UniteLines Options.jpg (file) |  |
8 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 UniteLines Before.jpg (file) |  |
97 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 UniteLines After.jpg (file) |  |
97 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 DefineCutRoute Lead InOut Options.jpg (file) |  |
28 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut53 DefineCutRoute.jpg (file) |  |
24 KB | NitramLegov (talk | contribs) | 1 | |
| 15:53, 14 June 2020 | LaserCut5.3 PowerOptions EngraveOptions.jpg (file) |  |
16 KB | NitramLegov (talk | contribs) | 1 | |
| 15:52, 14 June 2020 | LaserCut5.3 PowerOptions CutOptions.jpg (file) |  |
18 KB | NitramLegov (talk | contribs) | 1 | |
| 15:52, 14 June 2020 | LaserCut5.3 PowerOptions.jpg (file) |  |
199 KB | NitramLegov (talk | contribs) | 1 | |
| 15:52, 14 June 2020 | LaserCut Control Panel Datum.jpg (file) |  |
78 KB | NitramLegov (talk | contribs) | 1 | |
| 19:00, 30 May 2020 | Werkstattordnung.pdf (file) | |
153 KB | NitramLegov (talk | contribs) | 4 | |
| 20:08, 4 May 2020 | GT-7910A.jpg (file) |  |
123 KB | Lukas (talk | contribs) | the EasyHome GT-7910A ultrasonic cleaner in operation | 1 |
| 14:06, 2 May 2020 | BlenderStartup.jpg (file) |  |
139 KB | Luzian (talk | contribs) | startup settings in Bleder 2.82 | 1 |
| 14:01, 2 May 2020 | MemeBell.png (file) |  |
82 KB | Luzian (talk | contribs) | sticker designed by pakue, can be found in the telegram sticker pack | 1 |
