File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 23:38, 28 May 2019 | Laser-Tigerente 5.jpg (file) |  |
629 KB | Lukas (talk | contribs) | Project:Tigerente laser engraved variation, step 5: final assembly with waxed body & wheels | 1 |
| 23:35, 28 May 2019 | Laser-Tigerente 4.JPG (file) |  |
368 KB | Lukas (talk | contribs) | Project:Tigerente laser engraved variation, step 4: the wood darkens slightly due to the beeswax | 1 |
| 23:32, 28 May 2019 | Laser-Tigerente 3.JPG (file) |  |
427 KB | Lukas (talk | contribs) | Project:Tigerente laser engraved variation, step 3: apply beeswax with a heatgun and some rags or paper towels | 1 |
| 23:29, 28 May 2019 | Laser-Tigerente 2.JPG (file) |  |
404 KB | Lukas (talk | contribs) | Project:Tigerente laser engraved variation, step 2: test assembly after cutting (on the scroll saw as usual and drilling | 1 |
| 23:25, 28 May 2019 | Laser-Tigerente 1.JPG (file) |  |
424 KB | Lukas (talk | contribs) | Project:Tigerente laser engraved variation, step 1: engrave your design with a laser cutter | 1 |
| 23:19, 28 May 2019 | Eccentric sander motion.png (file) |  |
524 KB | Lukas (talk | contribs) | an eccentric sander in motion (with schematic drawn over in Inkscape because you can't actually see what's happening) | 1 |
| 22:53, 28 May 2019 | Screw marking gauge.JPG (file) |  |
255 KB | Lukas (talk | contribs) | quick and dirty marking gauge made from a screw in a piece of scrap wood | 1 |
| 18:39, 28 May 2019 | Bessey Winkelspanner.jpg (file) |  |
1.03 MB | Lukas (talk | contribs) | two Bessey corner clamps (probably WS3) in use to assemble a simple cabinet Category:Furniture | 1 |
| 04:01, 19 May 2019 | Wood screw box.jpg (file) |  |
2.77 MB | Pakue (talk | contribs) | Storage box for our wood screws that will be restocked. [https://www.mysortimo.de/en/BOXXes-%26-Cases/T-BOXX-G/T-BOXX-G-empty/T-BOXX-G-empty/p/000000006000010978 Sortimo T-BOXX G] with 3D printed inserts. | 1 |
| 17:24, 8 May 2019 | Project Wall.JPG (file) |  |
81 KB | NitramLegov (talk | contribs) | 1 | |
| 16:50, 8 May 2019 | CoMa Website development.jpg (file) |  |
224 KB | NitramLegov (talk | contribs) | Our new website in an early development stage | 1 |
| 15:09, 8 May 2019 | Schwenkgrill einklappen.gif (file) |  |
1.08 MB | Lukas (talk | contribs) | Project:Schwenkgrill so einfach kann man den Grill zusammenklappen :-) (GIF mit [https://ezgif.com/ ezGIF.com] aus einem MP4-Video erstellt) | 1 |
| 14:58, 8 May 2019 | Schwenkgrill 16.JPG (file) |  |
855 KB | Lukas (talk | contribs) | Project:Schwenkgrill letzter Schritt: Feuer drunter & guten Hunger! | 1 |
| 14:06, 8 May 2019 | Schwenkgrill 15.JPG (file) |  |
404 KB | Lukas (talk | contribs) | Project:Schwenkgrill nach einem fehlgeschlagenen Versuch mit Vorhanghaken wurden die Enden der Kette mit Schlüsselringen am Rost festgemacht (passende Karabiner wären noch besser) | 1 |
| 14:04, 8 May 2019 | Schwenkgrill 14.JPG (file) |  |
492 KB | Lukas (talk | contribs) | Project:Schwenkgrill ein Stück Kette am Ende des Drahtseils kann zur Höhenverstellung an zwei Flügelmuttern verhakt werden | 1 |
| 14:02, 8 May 2019 | Schwenkgrill 13.JPG (file) |  |
447 KB | Lukas (talk | contribs) | Project:Schwenkgrill in die "W"-Bögen hineinragende Enden eines weiteren Stücks Bewehrungsstahl müssen abgeschnitten werden, um nicht im Weg zu sein | 1 |
| 13:58, 8 May 2019 | Schwenkgrill 12.JPG (file) |  |
414 KB | Lukas (talk | contribs) | Project:Schwenkgrill um das "W", das die Bewegung des Dreibeins am idealen Punkt stoppen soll, in der richtigen Position anzuschweißen, sollte man sich lieber ein paar helfende Hände holen... | 1 |
| 13:55, 8 May 2019 | Schwenkgrill 11.JPG (file) |  |
413 KB | Lukas (talk | contribs) | Project:Schwenkgrill Testaufbau zur Ausrichtung des "W"-Stücks | 1 |
| 13:33, 8 May 2019 | Schwenkgrill 10.JPG (file) |  |
430 KB | Lukas (talk | contribs) | Project:Schwenkgrill der Bewehrungsstahl wird in eine (ungefähr) symmetrische "W"-Form gebogen | 1 |
| 13:29, 8 May 2019 | Schwenkgrill 09.JPG (file) |  |
396 KB | Lukas (talk | contribs) | Project:Schwenkgrill mit einem Bohrschleifer können kleine rechteckige Aussparungen für die Umlenkrolle in das mittlere Rohr geschnitten werden | 1 |
| 13:26, 8 May 2019 | Schwenkgrill 08.JPG (file) |  |
427 KB | Lukas (talk | contribs) | Project:Schwenkgrill ein großer Stufenbohrer gibt einen ganz passablen handgeführten Entgrater ab... | 1 |
| 13:18, 8 May 2019 | Schwenkgrill 07.JPG (file) |  |
468 KB | Lukas (talk | contribs) | Project:Schwenkgrill die flachgedrückten Stellen werden mit einem Stufenbohrer weit aufgebohrt, um sich gut um die Gewindestange bewegen zu können | 1 |
| 13:16, 8 May 2019 | Schwenkgrill 06.JPG (file) |  |
503 KB | Lukas (talk | contribs) | Project:Schwenkgrill Die beiden äußeren Stahlrohre werden an einem Ende im Schraubstock flachgedrückt | 1 |
| 13:14, 8 May 2019 | Schwenkgrill 05.JPG (file) |  |
453 KB | Lukas (talk | contribs) | Project:Schwenkgrill Bohrlöcher in Metall am besten immer gleich entgraten, um sich nicht zu verletzen! | 1 |
| 13:12, 8 May 2019 | Schwenkgrill 04.JPG (file) |  |
503 KB | Lukas (talk | contribs) | Project:Schwenkgrill um in die Stahlrohre zu bohren sind ein Maschinenschraubstock und eine Tischverlängerung sinnvoll | 1 |
| 13:10, 8 May 2019 | Schwenkgrill 03.JPG (file) |  |
458 KB | Lukas (talk | contribs) | Project:Schwenkgrill die Umlenkrolle braucht eine Bohrung für die Gewindestange (am besten schön zentriert auf der Drechselbank) | 1 |
| 13:04, 8 May 2019 | Schwenkgrill 02.JPG (file) |  |
459 KB | Lukas (talk | contribs) | Project:Schwenkgrill optional, aber cool: Umlenkrolle aus Buche drechseln | 1 |
| 12:58, 8 May 2019 | Schwenkgrill 01.JPG (file) |  |
356 KB | Lukas (talk | contribs) | Project:Schwenkgrill (fast) das gesamte Material zu Beginn | 1 |
| 20:17, 7 May 2019 | E-Room-Co.jpg (file) |  |
457 KB | Johannes (talk | contribs) | 1 | |
| 20:37, 3 May 2019 | Wedding figures cake.jpg (file) |  |
229 KB | Mitja (talk | contribs) | Finished Project:Wedding Figures on a special cake. | 1 |
| 20:15, 3 May 2019 | Wedding figures painted.jpg (file) |  |
86 KB | Mitja (talk | contribs) | Painted wedding figures for cake decoration. | 1 |
| 20:14, 3 May 2019 | Wedding figures cut.jpg (file) |  |
131 KB | Mitja (talk | contribs) | Cut and sanded figures before painting. | 1 |
| 20:13, 3 May 2019 | Wedding figures cutting.jpg (file) |  |
131 KB | Mitja (talk | contribs) | Cutting the figures on the scroll saw. | 1 |
| 20:12, 3 May 2019 | Wedding figures copy.jpg (file) |  |
115 KB | Mitja (talk | contribs) | Copying the shapes from a printout using carbon paper. | 1 |
| 17:26, 2 May 2019 | Abused woodturning tools.JPG (file) |  |
380 KB | Lukas (talk | contribs) | woodturning tools that were abused and bent :-( | 1 |
| 17:15, 2 May 2019 | Panel carrying.JPG (file) |  |
433 KB | Lukas (talk | contribs) | using panel carriers to move a large workpiece out of the CoMaking room | 1 |
| 17:08, 2 May 2019 | Panel carriers.JPG (file) |  |
301 KB | Lukas (talk | contribs) | two panel carriers on a table | 1 |
| 16:57, 2 May 2019 | Fretsaws.JPG (file) |  |
463 KB | Lukas (talk | contribs) | two fretsaws (one without a blade) on the wall | 1 |
| 17:09, 24 April 2019 | Speakers.jpg (file) |  |
223 KB | Luzian (talk | contribs) | 2*5W 4ohm 52mm speaker and 10W 4ohm 3" sub woofer | 1 |
| 17:00, 24 April 2019 | Audio amp.jpg (file) |  |
304 KB | Luzian (talk | contribs) | 1 | |
| 16:03, 24 April 2019 | Photo 2019-04-24 16-02-00.jpg (file) |  |
61 KB | Luzian (talk | contribs) | 1 | |
| 15:41, 24 April 2019 | BlenderLiveRender.png (file) |  |
1.88 MB | Luzian (talk | contribs) | 1 | |
| 15:25, 24 April 2019 | Laptopstand V3 vs V2.png (file) |  |
700 KB | Luzian (talk | contribs) | v2 & v3 next to each other | 1 |
| 14:56, 24 April 2019 | Laptopstand V2.png (file) |  |
184 KB | Luzian (talk | contribs) | 1 | |
| 22:05, 19 April 2019 | Swinging puffin.jpg (file) |  |
2.04 MB | Ignaz (talk | contribs) | Picture of finished swinging puffin. | 1 |
| 21:56, 19 April 2019 | Mask for swinging bird puffin.pdf (file) |  |
220 KB | Ignaz (talk | contribs) | Cutting mask for a swinging puffin made of wood | 1 |
| 22:17, 18 April 2019 | CNCjs connection.jpg (file) |  |
49 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Management Buttons.jpg (file) |  |
17 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Job Preview.jpg (file) |  |
213 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Console.jpg (file) |  |
133 KB | NitramLegov (talk | contribs) | 1 |
