Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 19:25, 28 September 2018 | Bowl gouge.svg (file) |  |
9 KB | square version | 2 |
| 21:33, 27 September 2018 | VHS table 08.jpg (file) |  |
392 KB | both VHS couch table legs finished and in front of their couch | 1 |
| 21:30, 27 September 2018 | VHS table 07.JPG (file) |  |
349 KB | the top board of a VHS couch table leg is made of two carefully laid out pieces to give a bit of extra stability from the inside and let each leg double as a side table when the large top is removed | 1 |
| 21:27, 27 September 2018 | VHS table 06.jpg (file) |  |
435 KB | finished tape assembly for a VHS couch table leg | 1 |
| 21:25, 27 September 2018 | VHS table 05.JPG (file) |  |
447 KB | to connect the different layers of VHS couch table legs with rivets, makeshift brackets out of some surplus tapes proved efficient (and nearly invisible in the end) | 1 |
| 21:21, 27 September 2018 | VHS table 04.JPG (file) |  |
483 KB | Fifth and most complicated layer of a VHS couch table leg: two sets of two sandwiched tapes and four single ones standing on their short edge, forming something like a rectangle. This weird arrangement was necessary to gain... | 1 |
| 21:20, 27 September 2018 | VHS table 03.JPG (file) |  |
506 KB | third and fourth layer of a VHS couch table leg: two tapes lying flat (they will be hidden later, don't choose your favorite ones) on top of another ring as was also used for the second layer | 1 |
| 21:18, 27 September 2018 | VHS table 02.JPG (file) |  |
558 KB | the second layer of a VHS couch table leg: four tapes on their long edge (labels nicely visible!) | 1 |
| 21:18, 27 September 2018 | VHS table 01.JPG (file) |  |
507 KB | assembling four VHS tapes in a square with a rivet gun - this will be the base of a couch table leg | 1 |
| 17:43, 20 September 2018 | Coming soon.svg (file) |  |
3 KB | placeholder for missing project photos, e.g. on your user page quickly created with Inkscape. | 1 |
| 18:54, 12 September 2018 | Tacklife PAH01D.JPG (file) |  |
4.09 MB | Tacklife PAH01D welding helmet sitting on its bag | 1 |
| 18:10, 5 August 2018 | Sticky, stringy.jpg (file) |  |
671 KB | pulling on some old adhesives holding a machine's feet | 1 |
| 02:15, 5 August 2018 | Alpha Tools WS 960-125.jpg (file) |  |
839 KB | Alpha Tools WS 960/125 disc grinder | 1 |
| 01:46, 5 August 2018 | M3 to M12 taps.jpg (file) |  |
433 KB | M3 to M12 set of three-stage taps | 1 |
| 01:44, 5 August 2018 | M3 to M12 dies.jpg (file) |  |
382 KB | set of M3 to M12 dies with their box and holder | 1 |
| 01:41, 5 August 2018 | Taps and dies.JPG (file) |  |
518 KB | a selection of our taps and dies and their respective holders | 1 |
| 22:52, 1 August 2018 | Paper cutter.JPG (file) |  |
349 KB | our 2 in 1 paper cutter (with its knife side in use) | 1 |
| 20:15, 1 August 2018 | Precious plastic shredder parts.jpg (file) |  |
412 KB | laser cut parts for our Precious Plastic shredder photo by Flor | 1 |
| 18:48, 20 July 2018 | Drying timber variety.JPG (file) |  |
430 KB | a bunch of logs (cherry and ash are in there, not sure about the others right now) treated with different drying methods so they can be used for projects at some point | 1 |
| 18:35, 20 July 2018 | Aq-edge working prototype.JPG (file) |  |
485 KB | first working prototype of Project:Aquarium Edge Illumination | 1 |
| 20:35, 11 July 2018 | Milling styrofoam.JPG (file) |  |
442 KB | a small block of styrofoam gets machined on an "EleksMill" CNC mill | 1 |
| 20:33, 11 July 2018 | EleksMill.jpg (file) |  |
385 KB | Mitja's "EleksMill" CNC mill on a table | 1 |
| 15:07, 10 July 2018 | Corroding magnets.JPG (file) |  |
252 KB | two corroding neodymium magnets next to an intact one (on the left) | 1 |
| 15:03, 8 July 2018 | CNC router.gif (file) |  |
3.74 MB | WorkBee CNC router cutting a circular pocket into a piece of eukalyptus glued laminated timber. GIF created with [https://giphy.com/create/gifmaker Giphy]. | 1 |
| 13:30, 8 July 2018 | CNC workholding - wood screws.JPG (file) |  |
434 KB | driving wood screws through your workpiece and into the spoilboard is a very simple CNC workholding option | 1 |
| 18:40, 5 July 2018 | Pizzapeel-6.JPG (file) |  |
310 KB | sanding the chamfer on a pizza peel with a sanding block to get a smooth surface | 1 |
| 18:38, 5 July 2018 | Pizzapeel-5.JPG (file) |  |
333 KB | forming the front chamfer of a pizza peel with a rasp | 1 |
| 18:38, 5 July 2018 | Pizzapeel-4.JPG (file) |  |
316 KB | sanding the edge of a freshly cut pizza peel with an old sanding disc | 1 |
| 18:36, 5 July 2018 | Pizzapeel-3.JPG (file) |  |
454 KB | pizza peel cut out on the scroll saw | 1 |
| 18:31, 5 July 2018 | Pizzapeel-2.JPG (file) |  |
364 KB | cutting a pizza peel from a sheet of multi-ply on the scroll saw | 1 |
| 18:30, 5 July 2018 | Pizzapeel-1.JPG (file) |  |
292 KB | taping a pizza peel design to birch multi-ply before cutting | 1 |
| 18:26, 5 July 2018 | Pizzapeel-0.JPG (file) |  |
286 KB | (probably) finished pizza peel from birch multi-ply | 1 |
| 20:54, 2 July 2018 | Clamping claw cross.JPG (file) |  |
392 KB | a cross-like orientation of clamping claws secures your workpiece from all four sides when using the CNC router | 1 |
| 07:28, 4 June 2018 | Dishwasher.JPG (file) |  |
391 KB | our dishwasher in the kitchen area | 1 |
| 07:26, 4 June 2018 | Kitchen cabinet.JPG (file) |  |
314 KB | the bottom left kitchen cabinet, holding stuff like plates and cutlery | 1 |
| 07:21, 4 June 2018 | CoMakingSpace kitchen.JPG (file) |  |
272 KB | our kitchen area with someone raiding the fridge | 1 |
| 07:07, 4 June 2018 | Snips vs plastic.JPG (file) |  |
373 KB | although snips are usually used for sheet metal, they are also great for cutting tough plastic packaging! | 1 |
| 06:59, 4 June 2018 | PVC pieces.JPG (file) |  |
253 KB | two small PVC pieces left over from making holddowns with the CNC router | 1 |
| 06:49, 4 June 2018 | Tangit PVC adhesive.JPG (file) |  |
138 KB | "Tangit" cleaner and adhesive for PVC. | 1 |
| 06:03, 4 June 2018 | Table saw power supply.JPG (file) |  |
510 KB | We strongly recommend to use this setup to power the table saw: outlet -> shop vac (set to "Auto") -> foot switch -> table saw. This makes sure the shop vac is automatically turned on with the saw and everything can quickly... | 1 |
| 10:30, 3 June 2018 | Two table saw fences.png (file) |  |
1.83 MB | As described in the table saw introduction, DO NOT use both table saw fences at once or you could experience kickback! Photo edited with Inkscape. | 2 |
| 01:25, 26 April 2018 | Screw head oval (raised).PNG (file) | .PNG) |
14 KB | icon of an oval screw head (screenshot of a Tinkercad model) -> very similar: File:screw head countersunk.PNG and File:screw head round.PNG | 1 |
| 01:23, 26 April 2018 | Screw head hex+plate.PNG (file) |  |
18 KB | icon of an external hex screw head with a "plate" (screenshot of a Tinkercad model) | 1 |
| 01:22, 26 April 2018 | Screw head round.PNG (file) |  |
15 KB | icon of a rounded screw head (screenshot of a Tinkercad model) -> very similar: File:screw head button.PNG | 1 |
| 01:21, 26 April 2018 | Screw head button.PNG (file) |  |
16 KB | icon of a "button" screw head (screenshot of a Tinkercad model) | 1 |
| 13:19, 17 April 2018 | SDS bits.JPG (file) |  |
355 KB | some SDS chisel bits and drill bits for use with a rotary hammer | 1 |
| 13:14, 17 April 2018 | SDS drill bits.jpg (file) |  |
620 KB | set of SDS drill bits to use with a rotary hammer | 1 |
| 20:36, 4 April 2018 | M radio antenna.JPG (file) |  |
658 KB | our M-shaped [Project:Roof Sign|antenna/sign on the roof], made windproof with two boxes of rocks | 1 |
| 20:28, 4 April 2018 | Photo table.JPG (file) |  |
373 KB | Moritz taking a photo of a 3D printed screw on our photo table | 1 |
| 01:35, 22 March 2018 | Compressor oil level.JPG (file) |  |
383 KB | oil level indicator on the Einhell Air Tech Euro 2200-1 compressor - the reading should always be between the top edge and the red dot | 1 |
