File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 15:03, 8 July 2018 | CNC router.gif (file) |  |
3.74 MB | Lukas (talk | contribs) | WorkBee CNC router cutting a circular pocket into a piece of eukalyptus glued laminated timber. GIF created with [https://giphy.com/create/gifmaker Giphy]. | 1 |
| 13:30, 8 July 2018 | CNC workholding - wood screws.JPG (file) |  |
434 KB | Lukas (talk | contribs) | driving wood screws through your workpiece and into the spoilboard is a very simple CNC workholding option | 1 |
| 18:40, 5 July 2018 | Pizzapeel-6.JPG (file) |  |
310 KB | Lukas (talk | contribs) | sanding the chamfer on a pizza peel with a sanding block to get a smooth surface | 1 |
| 18:38, 5 July 2018 | Pizzapeel-5.JPG (file) |  |
333 KB | Lukas (talk | contribs) | forming the front chamfer of a pizza peel with a rasp | 1 |
| 18:38, 5 July 2018 | Pizzapeel-4.JPG (file) |  |
316 KB | Lukas (talk | contribs) | sanding the edge of a freshly cut pizza peel with an old sanding disc | 1 |
| 18:36, 5 July 2018 | Pizzapeel-3.JPG (file) |  |
454 KB | Lukas (talk | contribs) | pizza peel cut out on the scroll saw | 1 |
| 18:31, 5 July 2018 | Pizzapeel-2.JPG (file) |  |
364 KB | Lukas (talk | contribs) | cutting a pizza peel from a sheet of multi-ply on the scroll saw | 1 |
| 18:30, 5 July 2018 | Pizzapeel-1.JPG (file) |  |
292 KB | Lukas (talk | contribs) | taping a pizza peel design to birch multi-ply before cutting | 1 |
| 18:26, 5 July 2018 | Pizzapeel-0.JPG (file) |  |
286 KB | Lukas (talk | contribs) | (probably) finished pizza peel from birch multi-ply | 1 |
| 21:15, 4 July 2018 | Pen.jpg (file) |  |
645 KB | NitramLegov (talk | contribs) | 1 | |
| 14:55, 4 July 2018 | Screwdriver hex bit.jpg (file) |  |
795 KB | NitramLegov (talk | contribs) | 1 | |
| 14:55, 4 July 2018 | Tape Measure.jpg (file) |  |
1.48 MB | NitramLegov (talk | contribs) | 1 | |
| 14:55, 4 July 2018 | Shop Scissors.jpg (file) |  |
1.8 MB | NitramLegov (talk | contribs) | 1 | |
| 14:54, 4 July 2018 | Rasps.jpg (file) |  |
1.93 MB | NitramLegov (talk | contribs) | 1 | |
| 14:54, 4 July 2018 | PSR960.jpg (file) |  |
1.06 MB | NitramLegov (talk | contribs) | 1 | |
| 14:54, 4 July 2018 | Pincer.jpg (file) |  |
1.49 MB | NitramLegov (talk | contribs) | 1 | |
| 14:54, 4 July 2018 | Pencils.jpg (file) |  |
1.7 MB | NitramLegov (talk | contribs) | 1 | |
| 14:52, 4 July 2018 | Multimeter.jpg (file) |  |
1.47 MB | NitramLegov (talk | contribs) | 1 | |
| 14:50, 4 July 2018 | End Mills.jpg (file) |  |
1.3 MB | NitramLegov (talk | contribs) | 1 | |
| 14:50, 4 July 2018 | Digital Solder station.JPG (file) |  |
1.11 MB | NitramLegov (talk | contribs) | 1 | |
| 14:50, 4 July 2018 | Cutter.jpg (file) |  |
1.23 MB | NitramLegov (talk | contribs) | 1 | |
| 14:50, 4 July 2018 | Bolt Cutter.jpg (file) |  |
1.69 MB | NitramLegov (talk | contribs) | 1 | |
| 14:50, 4 July 2018 | AlphaToolsAS18A.jpg (file) |  |
1.33 MB | NitramLegov (talk | contribs) | 1 | |
| 20:54, 2 July 2018 | Clamping claw cross.JPG (file) |  |
392 KB | Lukas (talk | contribs) | a cross-like orientation of clamping claws secures your workpiece from all four sides when using the CNC router | 1 |
| 11:16, 2 July 2018 | DSLR Microscope.jpg (file) |  |
1.82 MB | Pakue (talk | contribs) | Project:DSLR Microscope | 1 |
| 09:44, 2 July 2018 | CNC Clamps use.jpg (file) |  |
1.44 MB | Pakue (talk | contribs) | A CNC clamp for work holding a piece of Material:POM | 1 |
| 09:33, 2 July 2018 | CNC Clamps.jpg (file) |  |
1.86 MB | Pakue (talk | contribs) | CNC Router Workholding#Clamps after being routed out and still connected with tabs. | 1 |
| 22:38, 29 June 2018 | CNC 01.png (file) |  |
15 KB | Nils (talk | contribs) | 1 | |
| 23:08, 21 June 2018 | Rivet Gun.JPG (file) |  |
1.6 MB | NitramLegov (talk | contribs) | 1 | |
| 22:52, 21 June 2018 | Breadboard.JPG (file) |  |
1.21 MB | NitramLegov (talk | contribs) | 1 | |
| 22:52, 21 June 2018 | LED strip with Controller.JPG (file) |  |
1.69 MB | NitramLegov (talk | contribs) | 1 | |
| 22:51, 21 June 2018 | LED Red.JPG (file) |  |
312 KB | NitramLegov (talk | contribs) | 1 | |
| 12:37, 20 June 2018 | MultiMaterialPrinter.JPG (file) |  |
5.46 MB | NitramLegov (talk | contribs) | 1 | |
| 12:36, 20 June 2018 | MultiMaterialSlicingExample.png (file) |  |
82 KB | NitramLegov (talk | contribs) | 1 | |
| 23:17, 14 June 2018 | Router Bits.JPG (file) |  |
5.91 MB | NitramLegov (talk | contribs) | 1 | |
| 23:11, 14 June 2018 | Ferm FBF-1050E.JPG (file) |  |
4.63 MB | NitramLegov (talk | contribs) | 1 | |
| 23:09, 9 June 2018 | Wing Nuts.jpg (file) |  |
903 KB | NitramLegov (talk | contribs) | 1 | |
| 23:09, 9 June 2018 | T-Nuts.jpg (file) |  |
868 KB | NitramLegov (talk | contribs) | 1 | |
| 22:27, 9 June 2018 | Dust mask.jpg (file) |  |
1.19 MB | NitramLegov (talk | contribs) | 1 | |
| 22:27, 9 June 2018 | Gloves Single.jpg (file) |  |
2.06 MB | NitramLegov (talk | contribs) | 1 | |
| 22:20, 9 June 2018 | Projector.jpg (file) |  |
1.5 MB | NitramLegov (talk | contribs) | 1 | |
| 22:12, 9 June 2018 | HP LaserJet 8150DN.JPG (file) |  |
1.15 MB | NitramLegov (talk | contribs) | 1 | |
| 18:59, 9 June 2018 | ShopVac Super K11-SQ14.JPG (file) |  |
5.22 MB | NitramLegov (talk | contribs) | 1 | |
| 18:37, 9 June 2018 | MusicStation.JPG (file) |  |
1.29 MB | NitramLegov (talk | contribs) | 2 | |
| 07:28, 4 June 2018 | Dishwasher.JPG (file) |  |
391 KB | Lukas (talk | contribs) | our dishwasher in the kitchen area | 1 |
| 07:26, 4 June 2018 | Kitchen cabinet.JPG (file) |  |
314 KB | Lukas (talk | contribs) | the bottom left kitchen cabinet, holding stuff like plates and cutlery | 1 |
| 07:21, 4 June 2018 | CoMakingSpace kitchen.JPG (file) |  |
272 KB | Lukas (talk | contribs) | our kitchen area with someone raiding the fridge | 1 |
| 07:07, 4 June 2018 | Snips vs plastic.JPG (file) |  |
373 KB | Lukas (talk | contribs) | although snips are usually used for sheet metal, they are also great for cutting tough plastic packaging! | 1 |
| 06:59, 4 June 2018 | PVC pieces.JPG (file) |  |
253 KB | Lukas (talk | contribs) | two small PVC pieces left over from making holddowns with the CNC router | 1 |
| 06:49, 4 June 2018 | Tangit PVC adhesive.JPG (file) |  |
138 KB | Lukas (talk | contribs) | "Tangit" cleaner and adhesive for PVC. | 1 |
