WoodSter 2 BS 412
From CoMakingSpace Wiki
WoodSter 2 BS 412
| MachineInfoBox WoodSter 2 BS 412 | |
|---|---|
| |
| Type: | Vertical Bandsaws |
| Material: | wood |
| Used with: | 1865 mm bandsaw blades |
| Location: | Wood Workshop |
| Access Requirements: | Vertical Bandsaw Introduction |
| Status: | Working |
| Manual: | printout by the machine; nearly identical PDF: Inca EURO 260 (inca-maschinen.ch) |
| Tutors: | Lukas Pakue Jakob Loewenstein |
The "WoodSter 2 BS 412" is a medium-size vertical bandsaw for 1865 mm blades.
It is very similar, if not identical, to an Inca EURO 260. [1]
Specs
- cutting height: 155 mm
- throat clearance (Ausladung): 260 mm
- wheel diameter: 280 mm
- blade (DE and EN manual sections differ?!)
- blade length: 1865 mm
- blade width: 3-15 mm (DE)/3-18 mm (EN)
- blade thickness: 0.4-0.65 mm (DE)/0.5 mm (EN)
- motor speed: 1000 rpm
- table tilt: max. 45°
Blade Guides
Please use these pictures for reference when setting up the blade guides (bottom guides are not shown, but behave the same):
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | done |
| Find the manual as PDF | PDF: very similar - exact brand not found | done |
| Documentation | this page, status: in commissioning | done |
| Print QR-Code | use the MachineQR Factory | done |
| Introduction | needs new/additional photos for blade guide adjustment | pending |
| Security Check | upper thrust bearing needs to be replaced | done |
| Test | Lukas 2025-4-23 | done |
| tool's name, owner and approx. value | provide to Johannes for inventorization | done |
| Last step: make it available | physically and in the wiki - then delete this template | done |
