Felder RL 160
From CoMakingSpace Wiki
Felder RL 160
| MachineInfoBox Felder RL 160 | |
|---|---|
| |
| Used with: | jointer-planer, table saw, air cleaners |
| Access Requirements: | |
| Tutors: | |
The Felder AF 14 should be in close proximity to the jointer-planer.
The system should be hooked up through the automated switch box (switched output) mounted on the metal frame, that should also be connected to the planer (trigger output). Once the planer is started the vacuum system will turn on after 3 seconds and turn off once the planer is off for 8 seconds. Make sure to set the switch on the vacuum motor to '1' (ON) before starting!
Our air cleaners are automagically started along with this dust extractor to pick up whatever manages to pass the coarse filter.
Collection bag dimensions 2x850x1300x0.1mm (original Felder).
