File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 20:21, 27 September 2018 | VHS table 04.JPG (file) |  |
483 KB | Lukas (talk | contribs) | Fifth and most complicated layer of a VHS couch table leg: two sets of two sandwiched tapes and four single ones standing on their short edge, forming something like a rectangle. This weird arrangement was necessary to gain... | 1 |
| 20:20, 27 September 2018 | VHS table 03.JPG (file) |  |
506 KB | Lukas (talk | contribs) | third and fourth layer of a VHS couch table leg: two tapes lying flat (they will be hidden later, don't choose your favorite ones) on top of another ring as was also used for the second layer | 1 |
| 20:18, 27 September 2018 | VHS table 02.JPG (file) |  |
558 KB | Lukas (talk | contribs) | the second layer of a VHS couch table leg: four tapes on their long edge (labels nicely visible!) | 1 |
| 20:18, 27 September 2018 | VHS table 01.JPG (file) |  |
507 KB | Lukas (talk | contribs) | assembling four VHS tapes in a square with a rivet gun - this will be the base of a couch table leg | 1 |
| 16:43, 20 September 2018 | Coming soon.svg (file) |  |
3 KB | Lukas (talk | contribs) | placeholder for missing project photos, e.g. on your user page quickly created with Inkscape. | 1 |
| 01:47, 15 September 2018 | Zentrierbohrer.jpg (file) |  |
2.62 MB | Johannes (talk | contribs) | 1 | |
| 01:34, 15 September 2018 | Rollkörnerbild1.jpg (file) |  |
2.54 MB | Johannes (talk | contribs) | 1 | |
| 01:33, 15 September 2018 | Rollkörnerbild2.jpg (file) |  |
2.73 MB | Johannes (talk | contribs) | 1 | |
| 01:17, 15 September 2018 | Drehmeißel eingespant.jpg (file) |  |
2.94 MB | Johannes (talk | contribs) | 1 | |
| 00:17, 15 September 2018 | Lathe Drehmeißelaufnahme.jpg (file) |  |
1.41 MB | Johannes (talk | contribs) | 1 | |
| 00:14, 15 September 2018 | Lathe Tool bild 1.jpg (file) |  |
2.99 MB | Johannes (talk | contribs) | 1 | |
| 23:08, 14 September 2018 | Twist Drill Bits.jpg (file) |  |
2.87 MB | Johannes (talk | contribs) | 1 | |
| 17:54, 12 September 2018 | Tacklife PAH01D.JPG (file) |  |
4.09 MB | Lukas (talk | contribs) | Tacklife PAH01D welding helmet sitting on its bag | 1 |
| 17:10, 5 August 2018 | Sticky, stringy.jpg (file) |  |
671 KB | Lukas (talk | contribs) | pulling on some old adhesives holding a machine's feet | 1 |
| 14:24, 5 August 2018 | Patricks Locker divider 4.jpg (file) |  |
1.59 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 14:23, 5 August 2018 | Patricks Locker divider 3.jpg (file) |  |
1.43 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 14:20, 5 August 2018 | Patricks Locker divider 2.jpg (file) |  |
1.44 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 14:19, 5 August 2018 | Patricks Locker divider 1.jpg (file) |  |
1.55 MB | Pakue (talk | contribs) | Project:Patricks Locker | 1 |
| 14:11, 5 August 2018 | Patricks Locker current.jpg (file) |  |
1.89 MB | Pakue (talk | contribs) | The current state of the Project:Patricks_Locker. | 1 |
| 01:15, 5 August 2018 | Alpha Tools WS 960-125.jpg (file) |  |
839 KB | Lukas (talk | contribs) | Alpha Tools WS 960/125 disc grinder | 1 |
| 00:46, 5 August 2018 | M3 to M12 taps.jpg (file) |  |
433 KB | Lukas (talk | contribs) | M3 to M12 set of three-stage taps | 1 |
| 00:44, 5 August 2018 | M3 to M12 dies.jpg (file) |  |
382 KB | Lukas (talk | contribs) | set of M3 to M12 dies with their box and holder | 1 |
| 00:41, 5 August 2018 | Taps and dies.JPG (file) |  |
518 KB | Lukas (talk | contribs) | a selection of our taps and dies and their respective holders | 1 |
| 23:13, 1 August 2018 | Microfluidics-progress.png (file) |  |
1.7 MB | Yunus (talk | contribs) | 1 | |
| 22:51, 1 August 2018 | Microfluidics thumbnail.jpg (file) |  |
569 KB | Yunus (talk | contribs) | One of our microfluidics chips. Entirely self-developed and self-photographed. All rights reserved. | 1 |
| 21:52, 1 August 2018 | Paper cutter.JPG (file) |  |
349 KB | Lukas (talk | contribs) | our 2 in 1 paper cutter (with its knife side in use) | 1 |
| 19:15, 1 August 2018 | Precious plastic shredder parts.jpg (file) |  |
412 KB | Lukas (talk | contribs) | laser cut parts for our Precious Plastic shredder photo by Flor | 1 |
| 16:51, 24 July 2018 | Parkside PSTD 800 A1.jpg (file) |  |
1.65 MB | NitramLegov (talk | contribs) | 1 | |
| 17:48, 20 July 2018 | Drying timber variety.JPG (file) |  |
430 KB | Lukas (talk | contribs) | a bunch of logs (cherry and ash are in there, not sure about the others right now) treated with different drying methods so they can be used for projects at some point | 1 |
| 17:35, 20 July 2018 | Aq-edge working prototype.JPG (file) |  |
485 KB | Lukas (talk | contribs) | first working prototype of Project:Aquarium Edge Illumination | 1 |
| 00:22, 12 July 2018 | CrimpingPliers.jpg (file) |  |
1.66 MB | NitramLegov (talk | contribs) | 1 | |
| 19:35, 11 July 2018 | Milling styrofoam.JPG (file) |  |
442 KB | Lukas (talk | contribs) | a small block of styrofoam gets machined on an "EleksMill" CNC mill | 1 |
| 19:33, 11 July 2018 | EleksMill.jpg (file) |  |
385 KB | Lukas (talk | contribs) | Mitja's "EleksMill" CNC mill on a table | 1 |
| 14:07, 10 July 2018 | Corroding magnets.JPG (file) |  |
252 KB | Lukas (talk | contribs) | two corroding neodymium magnets next to an intact one (on the left) | 1 |
| 18:36, 9 July 2018 | POF 1200.JPG (file) |  |
1.37 MB | NitramLegov (talk | contribs) | 1 | |
| 14:03, 8 July 2018 | CNC router.gif (file) |  |
3.74 MB | Lukas (talk | contribs) | WorkBee CNC router cutting a circular pocket into a piece of eukalyptus glued laminated timber. GIF created with [https://giphy.com/create/gifmaker Giphy]. | 1 |
| 12:30, 8 July 2018 | CNC workholding - wood screws.JPG (file) |  |
434 KB | Lukas (talk | contribs) | driving wood screws through your workpiece and into the spoilboard is a very simple CNC workholding option | 1 |
| 17:40, 5 July 2018 | Pizzapeel-6.JPG (file) |  |
310 KB | Lukas (talk | contribs) | sanding the chamfer on a pizza peel with a sanding block to get a smooth surface | 1 |
| 17:38, 5 July 2018 | Pizzapeel-5.JPG (file) |  |
333 KB | Lukas (talk | contribs) | forming the front chamfer of a pizza peel with a rasp | 1 |
| 17:38, 5 July 2018 | Pizzapeel-4.JPG (file) |  |
316 KB | Lukas (talk | contribs) | sanding the edge of a freshly cut pizza peel with an old sanding disc | 1 |
| 17:36, 5 July 2018 | Pizzapeel-3.JPG (file) |  |
454 KB | Lukas (talk | contribs) | pizza peel cut out on the scroll saw | 1 |
| 17:31, 5 July 2018 | Pizzapeel-2.JPG (file) |  |
364 KB | Lukas (talk | contribs) | cutting a pizza peel from a sheet of multi-ply on the scroll saw | 1 |
| 17:30, 5 July 2018 | Pizzapeel-1.JPG (file) |  |
292 KB | Lukas (talk | contribs) | taping a pizza peel design to birch multi-ply before cutting | 1 |
| 17:26, 5 July 2018 | Pizzapeel-0.JPG (file) |  |
286 KB | Lukas (talk | contribs) | (probably) finished pizza peel from birch multi-ply | 1 |
| 20:15, 4 July 2018 | Pen.jpg (file) |  |
645 KB | NitramLegov (talk | contribs) | 1 | |
| 13:55, 4 July 2018 | Screwdriver hex bit.jpg (file) |  |
795 KB | NitramLegov (talk | contribs) | 1 | |
| 13:55, 4 July 2018 | Tape Measure.jpg (file) |  |
1.48 MB | NitramLegov (talk | contribs) | 1 | |
| 13:55, 4 July 2018 | Shop Scissors.jpg (file) |  |
1.8 MB | NitramLegov (talk | contribs) | 1 | |
| 13:54, 4 July 2018 | Rasps.jpg (file) |  |
1.93 MB | NitramLegov (talk | contribs) | 1 | |
| 13:54, 4 July 2018 | PSR960.jpg (file) |  |
1.06 MB | NitramLegov (talk | contribs) | 1 |
