Dust Extractors

Besides the smaller shop vacs, we have two higher volume dust extractor that we might eventually hook up to a small system of pipes around the wood workshop.

BAMATO AB-550

MachineInfoBox BAMATO AB-550
Synonyms:	vacuum extractor, vacuum extraction machine DE: Absauganlage
Material:	wood & similar dust (not sparks!)
Used with:	hearing protection, breathing protection
Access Requirements:	<ul><li>The part "collection" of the query was not understood.Results might not be as expected.</li> <!--br--><li>The part "]]" of the query was not understood.Results might not be as expected.</li></ul>
Manual:	in the bag; nearly identical: Einhell TE-VE 550 A (the BAMATO does not have an automatic power outlet)
Tutors:	<ul><li>The part "collection" of the query was not understood.Results might not be as expected.</li> <!--br--><li>The part "]]" of the query was not understood.Results might not be as expected.</li></ul>
Similar (More or Less):	shop vacs

[[Has caption::dust collection| ]]

Caution - in its factory state, this machine does NOT have a fine dust filter! If used for tasks like sanding, it may even spread the fine dust more than if you had not used it at all. It is therefore mainly suitable for the extraction of larger chips and does NOT replace a dust mask.

Maintenance

UNPLUG before you do any maintenance

It should easily suck up smaller chips and saw dust from a surface if the pipe opening is placed perpendicular to the surface. If this is not the case you will have to service it. Over time larger chips that are sucked up don´t make it in to the rotor and clog the airway. They can usually be removed by disconnecting the pipe from the rotor and clearing the nest manually. Also the white fabric filter gets clogged over time and should be cleaned to. If the filter inflates like a bouncy castle upon turning it on, it is time to clean it. Wear a dust mask .
Obviously the plastic bag needs to be emptied when full.

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	done	BAMATO AB-550
Take a picture	-	done
Find the manual as PDF	nearly the same as Einhell TE-VE 550 A	done
Documentation	should contain dangers/precautions, basic facts (adapter sizes, power) and how to empty the bag	pending
Print QR-Code	use the wikicrawler	pending
Introduction	not needed	-
Security Check	Lukas	done
Test	Lukas	done
tool's name, owner and approx. value	entered by Lukas	done
Last step: make it available	physically and in the wiki - then delete this template	pending

Felder AF 14

The Felder AF 14 should be in close proximity to the jointer-planer.

The system should be hooked up through the automated switch box (switched output) mounted on the metal frame, that should also be connected to the planer (trigger output). Once the planer is started the vacuum system will turn on after 3 seconds and turn off once the planer is off for 8 seconds. Make sure to set the switch on the vacuum motor to '1' (ON) before starting!

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task	comment	Status
Name the tool:	-	pending
Take a picture	-	pending
Find the manual as PDF	needed for all machines - add a link to the InfoBox or comment where you could not find it	pending
Documentation	this page, status: in commissioning	pending
Print QR-Code	use the wikicrawler	pending
Introduction	-	pending
Security Check	to be done or witnessed by a manager	done
Test	to be done or witnessed by a manager	done
tool's name, owner and approx. value	provide to Patrick for inventorization	pending
Last step: make it available	physically and in the wiki - then delete this template	pending