Eccentric Sanders: Difference between revisions
(→Festo RO 2 E: velcro sheet glued on new pad) |
(→Festo RO 2 E: repair worked) |
||
Line 32: | Line 32: | ||
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (''keine Anlaufsicherung'')! | The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (''keine Anlaufsicherung'')! | ||
When the foam part of our usual sanding part crumbled away, [[User:Keno|Keno]] and {{£}} | When the foam part of our usual sanding part crumbled away, [[User:Keno|Keno]] and {{£}} glued its velcro ''(Klett)'' sheet to a healthier pad with bad velcro ("Polymer-Klebstoff", [[XPS]] scrap piece for even clamping pressure without breaking the disc). | ||
Revision as of 11:08, 20 April 2019
ToolInfoBox Eccentric Sanders | |
---|---|
Synonyms: | geared eccentric sanders, random orbital sanders, DE: (Getriebe-)Exzenterschleifer, Handscheibenschleifmaschinen |
Type: | power sanders |
Material: | wood |
Used with: | sanding discs |
Access Requirements: | after personal introduction |
Tutors: | Lukas, Patrick |
Similar (More or Less): | belt sander |
An eccentric sander is very useful for finishing surfaces. The major advantage of this kind of sander is the irregular motion of the sanding disc which greatly reduces unsightly marks on the workpiece.
Safety
When using an eccentric sander, always take the time to properly clamp down your workpiece, hook up the shop vac and wear safety glasses. Depending on your material, you may also need a dust mask.
As with all our sanders, please go outside if you can't keep the airborne dust to a minimum!
Suggested Reading
Festo RO 2 E
ToolInfoBox Festo RO 2 E | |
---|---|
Used with: | 150 mm sanding discs with 8 holes |
Location: | wood workshop |
Tutors: | Lukas, Patrick |
Manual: | manuall.de |
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!
When the foam part of our usual sanding part crumbled away, Keno and Lukas glued its velcro (Klett) sheet to a healthier pad with bad velcro ("Polymer-Klebstoff", XPS scrap piece for even clamping pressure without breaking the disc).
Festo RO 150 E
ToolInfoBox Festo RO 150 E | |
---|---|
Used with: | 150 mm sanding discs with 8 holes |
Location: | wood workshop (ladder shelf) |
Access Requirements: | after repair (see #25) & personal introduction |
Manual: | nearly identical to Festo RO 2 E (manuall.de) |
The Festo RO 150 E needs to be repaired (see #25) before it can be added to the wood workshop. Since the other one is working, this is not overly urgent though.